Guys good evening, this ? my first map, it should be quiet, I could say how it might go?
can I give more?, or have I given pi?,there are other things on which I should work on?
I have worked with map3d and ricoorretta with ecm.
Thanks I look forward to responses.
PS I do not know if ? the suitable section to publish these files, if I am wrong, I apologize.
diesel low, you can increase the top rail, 10% on the entire map ???, limiters pressure turbo 600 points ???, map VGT ??? ... manchano other mape ... egr active ...
Increases in the required torque, you can give more? up to 5%.
The limiter turbo ? too high of +24%
Rail pressure too high-keep on a 5%
Egr is not closed
Limit torque you can go up a little
Then first of all I thank you for the answers to the must? remake that would have happened if I had written it I would have done the damage? Tonight I put her back. Thanks again
P. S. the limiter turbo, put it in cos? high ? as if I had put in for nothing? The Cio? he pulled up to the risk of rupture?
Last edited by msport (exil77grande); 18-02-2014 to 00:06
the egr is still not closed,I have to document, other maps to see, at least with the advice that you gave me as I ricorretto this? thanks.
also made with the egr isn't it? I have read and visited a bit of back someone can controllarese I wrong?
Last edited by leandro89; 22-02-2014 to 02:28
It seems to me that the egr goes well, if I'm not mistaken, you could avoid changing the quantity? gas reintroduced and % valve opening. For maps of the pedal would start from about 1500rpm to about met? load with even a few percentage points in pi?.Originally Written by fabio1207
hello you said a few percentage points more?, the cio? 2% in the pi?? why? you should not touch the other 2 maps? thanks
then, for the other you say, how they should be?
Last edited by leandro89; 01-03-2014 at 09:49
Write permission
Quote