Hello to all this ? my first mappetta and ? for my car, a fiat bravo 1.9 mjet 16v 150cv.. I ruled out the egr and made some changes, thanks for those I help you?..? the first map, don't be too cruel..
a greeting to all...
Hello to all this ? my first mappetta and ? for my car, a fiat bravo 1.9 mjet 16v 150cv.. I ruled out the egr and made some changes, thanks for those I help you?..
lack of maps,lots of them!you touched on a single map turbo and a p? the map vgt,you have problems with lag?what are 1c4bd4-1c4c06 and 1c4b08-1c4b3a?
Hello, I am not an expert nor would I for? the forum has helped me a lot to understand the basics, especially reading the other threads ? quite useful. You've changed the 4 maps of the request torque too soon, and increments a p? high and little, step by step. Same thing for the turbo. In addition, you have modified the advances, even if just a little, for me ? gi? one thing more? advanced without considering other parameters to see in the mount of the changing English language advances. There are also many limiters by find and change.
Read this discussion ? a good start to understand the logic:
http://www.professionalchiptuning.ne...light=edc16c39
Hello guys thank you very much... I have Not yet had the opportunity to install it, I wanted to first ask and then maybe intervene by doing other things.. to those addresses, I have not changed tulla, I changed the curves with the driver titanium.. tips on how to fix this? ? my first map, for the limiters I heard about it, now I read a good discussion...
The maps out of the driver are mainly the limiters iq of the diesel fuel that you can raise them to make sure that your engine gives more? but always knowing tap limiter, torque etc
Sisi I read, I'm now looking for winols with the damos to find these iq.. For the rest of the map I edited the bit for the lambda why? among some installer? the downpipe.. To disable it, just remove the beep or do we need to adapt some other map from the driver? for the egr ? been taken away for good or it is necessary to intervene on other values? Thanks and sorry for the many questions but I want to learn more? possible..
I still can't see your map, and then not even all the rest of your changes? I can tell you that the software at least your unit work well as far as the egr, while as far as the limiters iq is not c'? you need to have win ols, but if you know the exact addresses you can work out the driver, or out by the voices that gives you the software ecm titanium in 2dOriginally Written by blasco_13
Sisi I read, I'm now looking for winols with the damos to find these iq.. For the rest of the map I edited the bit for the lambda why? among some installer? the downpipe.. To disable it, just remove the beep or do we need to adapt some other map from the driver? for the egr ? been taken away for good or it is necessary to intervene on other values? Thanks and sorry for the many questions but I want to learn more? possible..
Sisi, I know, the problem ? that I don't know them all... With ols and the damos in theory, you can find those addresses...
Addresses are always knowing the curves and the damos is not for you win ols find it all out driver ir? easily titanium
before you write that you can not see the map, and then are not able to help, now that you can give an answer that is very vague, I have to think that you composed it so? so to reach the threshold of 80 messages?
Write permission
Quote