opinion the map

[max75]

hi I would like an opinion on this map could go.....for the moment I only changed what I have found with ecm accept advice ? critical ..I recommend with caution..thanks

[cinqueturbo]

hi I would like an opinion on this map could go.....for the moment I only changed what I have found with ecm accept advice ? critical ..I recommend with caution..thanksidea peppe.rar

Damage not can do..
to the left out two lim. pair 06548C & 0680F8
Among other things, already talked about in several threads that the lim. couple read to the contrary..
then 065AD0 = 700gir 065AC0= 4500gir..
and to tell the truth? to touched everything and more? but for me it serves,
4 lim. pair around 1000 points, and injection split from 5-15% up to 3,300 gir pui scale.. enough..

[max75]

Thanks for the info tomorrow, I follow your directions. ..

[cinqueturbo]

Thanks for the info tomorrow, I follow your directions. ..

News??
to made some test?

[max75]

I spent a very busy day, as soon as I put the work I see what I can do terr? up-to-date.....

here I am, I was checking ? as you say I have to change the torque limiter 065AD0 = 700gir 065AC0= 4500gir.... so I have to moddare on the contrary, where the ecm shows me 700 of them should be 4500 ... then increase from 700gir at 2600 right!

[cinqueturbo]

I spent a very busy day, as soon as I put the work I see what I can do terr? up-to-date.....

here I am, I was checking ? as you say I have to change the torque limiter 065AD0 = 700gir 065AC0= 4500gir.... so I have to moddare on the contrary, where the ecm shows me 700 of them should be 4500 ... then increase from 700gir at 2600 right!

Sorry but you need modare to 700gir?
go from 1200-4500 no?..

[max75]

here I am, I found two other limiters...is a map that I have seen changed immediately after the limiter from another file I don't know what it is, I leave it like this!

dimanticavo I am attaching the file

maybe I did a little bit of confusion where you have indicated that 700 gir was 4500 rpm, I thought that I had to reverse starting in the contrary.....the fatigue is bad jokes...

[cinqueturbo]

You can upload it is not bad,
you started with 1600gir with lim,couple,
you can leave earlier and go to 4500giri you stopped before..
you will not get a performance improvement modando lim.pair(2) lim.pair #2(1) injection zoned(map1)(1)
with a stock engine..

[max75]

let's see if I understand a bit of pasienza this....

[cinqueturbo]

take a curiosity? but this discussion can you read?
http://www.professionalchiptuning.ne...ET-impariamola!