Problem reading edc15c7

[carlo abarth]

I love!!!

and what aspects to dissaldarla, it takes 30 seconds, and at this time you had already read and written.

[cinqueturbo]

I read in another discussion (renasse) that someone is using the power supply provided with the cock,
not, and yet you use it?

[blackwolf76]

I have a cock clonazzo that up to now I have never cheated, and that you had not supplied with any power supply which I paired one that I had from 2h of origin electronic equipment, stable fixed to 12.3 v that has never given me problems all the times that I have used.

[cinqueturbo]

I have a cock clonazzo that up to now I have never cheated, and that you had not supplied with any power supply which I paired one that I had from 2h of origin electronic equipment, stable fixed to 12.3 v that has never given me problems all the times that I have used.

That's great, but the ECU foods with gallo power supply with 2A?
No, No... maybe this is your problem..
then I food the cock with stabilized power supply, and food also the ECU with the one but not from the Gallo...

[blackwolf76]

I food all by gallo... for bdm and other ecu I have always used this system without the hassle.

[cinqueturbo]

Eee to want to go crazy..
You should also know that you have to leave the positive Pin4 fed and put under switch the Pin58,
and when the towel says you have to turn off and turn on,
and as what protocol are you using?
Bosch 1 micro flash 400 BootMode C167?

[ugoboss]

Eee to want to go crazy..
You should also know that you have to leave the positive Pin4 fed and put under switch the Pin58,
and when the towel says you have to turn off and turn on,
and as what protocol are you using?
Bosch 1 micro flash 400 BootMode C167?

cinqueturbo, explain to me this pin, the wiring of the cock already have the switches for ignition is switched on and off, I've always used and never had a problem, and the only thing that food, and all with my power supply.

[cinqueturbo]

cinqueturbo, explain to me this pin, the wiring of the cock already have the switches for ignition is switched on and off, I've always used and never had a problem, and the only thing that food, and all with my power supply.

ugoboss even I have had more? problems when set aside or the power supply provided with the cock,
the switch is wired to the system of the rooster cuts off power supply to all the positive,
and then also the main power of the unit, we should just turn the ignition off.. not the whole unit..
I limit use the power of the cock for on-off framework, not to feed the ECU itself.

[ugoboss]

ugoboss even I have had more? problems when set aside or the power supply provided with the cock,
the switch is wired to the system of the rooster cuts off power supply to all the positive,
and then also the main power of the unit, we should just turn the ignition off.. not the whole unit..
I limit use the power of the cock for on-off framework, not to feed the ECU itself.

ok understood, but I' never had a problem and it is because of this that I did not understand, however, the first thing to do is to use an external power supply good, and not that of the rooster, or in any interface, so that both the bdm or the piasini because I already happened to voltage sags hallucinating and after are problems.

[gcmotor]

I also think that it would be better to remove the flash and riprogrammarla. Sometimes, you can't do otherwise