body computer alfa 147 jtd 140cv test bench arrow right rear

[itama]

all depends on your degree of preparation, if you are familiar with soldering, you can switch the micro, but if not, l've never done it yourself, I recommend you do the damage, then the choice is up to you, who shall judge on the basis of your familiarity, what about the reading and writing I see it as a thing feasible, even if not l've never done it with a little help from colleagues in the forum would you be able certainly, the body must be diesel as your and about is also the year of manufacture, if you see it with your own code, go safe, at the end you only have to pass the e2p of the micro-code or keys always depends on what you want to do, I hope this information was useful, in regards to your problem you already have? tried to activate with the diagnosis?

About the diagnosis
Made and cares about it all because I the voltage lampeggiantecla found? on the two pin unused

My same code body as it is? Where I identify there are different names is made with the numbers

but this e2p would be another eprom that has nothing to do with the chip motorola oe' the same thing??
also in this e2p what content and how do I read it???.... with the upa??

[giuseppe1374]

rileggiti my surgery you will find all the answers, it seems to me it is clear that the e2p ? contained in the micro!
the software number ? written out in the body just take the code and you do a search!
last thing I have not told you to make a diagnosis! I told you to turn on the arrow with the diagnosis! maybe if you read carefully what you write
it revenues something.

[itama]

rileggiti my surgery you will find all the answers, it seems to me it is clear that the e2p ? contained in the micro!
the software number ? written out in the body just take the code and you do a search!
last thing I have not told you to make a diagnosis! I told you to turn on the arrow with the diagnosis! maybe if you read carefully what you write
it revenues something.

hello joseph, the command from the diagnosis I had already? fact, and no error when I run the test switch on the side and the front but the rear no
I repeat, I find the voltage flashing on pin 2 not used directly tested on the body with the connector unplugged when you wrote me this morning, I had already mounted the body on the car from the diagnosis I go to this software.
so I'm going to collapse and I'm looking for a body the same version software 09861010049 and I go quiet?(sorry, once I've written the code body now software.

can you give me the confirmation?

Number drawing FIAT: 51711429000
Number Hardware: 01861080079
Hardware Version: 00
Number Software: 09861010049
Software Version: 0306
Number approval: 000033
Date of planning: 12/02/2002

[giuseppe1374]

well I said the code body that it goes well and after or said software code for greater compatibility? I hope that this clarification is only for your pi? precise research and not for any sort of clarification, as a rule it's ok to just the hardware code to match 100% with the software, but I've also fitted with hardware and different software and machines are affixed, as the basis, take the body from the breakdown and try it as is ? we must all work except of course, remote control key and the immo and you flash the framework via the proxy, but at least you can test if everything works after that you can go to the next step that you choose according to your need and suitability.

[itama]

no quiet Joseph ? that are novice enough to go in confusion .
I wanted to ask you since I'm also studying to remap the UPA also does this for the case?
if it is compatible with ecm titanium?

[giuseppe1374]

the upa does not go for this job as your microprocessor and with safety, you want to xprog or move the micro to the ecm ? a mapping software, and has nothing to do with your problem

[gcmotor]

Hello guys, someone can? tell me if the body computer N 51781759 of the Fiat Grande Punto (199) 1.2 8v year 2006 is compatible with the one that fits the later model EVO. Change color, and also change the numbers. or, if you know what other number to be compatible as the original one do not find it used.
Thanks

[leandro89]

Hello guys, someone can? tell me if the body computer N 51781759 of the Fiat Grande Punto (199) 1.2 8v year 2006 is compatible with the one that fits the later model EVO. Change color, and also change the numbers. or, if you know what other number to be compatible as the original one do not find it used.
Thanks

it seems the discussion of the right to make this demand? we talk about the alfa 147 and non-fiat grande punto

[pabloescobar]

Would it not be more? easy to put two wires that go on the arrow to the front and side working, and pass them to the rear?

[gcmotor]

I apologize, talking about body computer.. Open the discussion in part