Reading the lancia musa 1.3 mjtd file from 3mb?

[eobdexpression]

Hi to all I ? 've read a lancia musa 1.3 mjtd with a rooster v2 V53 and practically by selecting the driver for the 70 hp but for the multijet 75/90/101 cv I've done the reading file given that the owner had told me it was 75 hp, and not 70 hp, I gave them the confirmation, and after 43 minutes, gave me a file of 3 mb and I stunned with the doubt, I decided to ask if someone of you ? never happened why? that I know of usually a maximum of this protocol engines always gave me a file that is 2.5 mb and not 3mb. But pu? be? I completely trying to read with the driver for the 70 hp tells me that I have to use to force the 75 hp or the one in which I read the file from 3mb. Here you are now you place the photo data to the ecu and read file.

[ugoboss]

from the numbers, reports to, and is a 70cv, I'd recommend you to get in bdm and not think about it more.

[michell]

I confirm the holy words of ugoboss flaw in the bdm is not risking with these ecu with clones....

[fuorigiri12000]

I confirm the holy words of ugoboss flaw in the bdm is not risking with these ecu with clones....

Regardless of the clones, I also use the bdm on these ecu, the risk is considerably lower.

[motorsport]

I confirm on the lancia musa nn I could,read it in the bdm!!

[cinqueturbo]

I I i 1,3Mjet 90hp or had only bad experiences,
even in writing...
but then I read in the serial. 45-80 minutes?
I sventro and the richiudo in place of the time and I take as well a coffee?...

[eobdexpression]

Thanks for the advice but since ? one thing very strange for me that I ? happened I wanted to ask, however, I was not thinking about ? that I have to remove and then try it without that adapter yellow interposed between the cable and the socket eobd rooster v2 v53?

[ugoboss]

Thanks for the advice but since ? one thing very strange for me that I ? happened I wanted to ask, however, I was not thinking about ? that I have to remove and then try it without that adapter yellow interposed between the cable and the socket eobd rooster v2 v53?

if it tells you to use it because you want to remove, why do you want to create problems even when there are, the flaw in the bdm.

[eobdexpression]

if it tells you to use it because you want to remove, why do you want to create problems even when there are, the flaw in the bdm.

You ugoboss but to be able to recognize it from when to use it or not I have to do?

I'm sorry as I have to see it to recognize whether to use it or not this I mean

[motorsport]

Thanks for the advice but since ? one thing very strange for me that I ? happened I wanted to ask, however, I was not thinking about ? that I have to remove and then try it without that adapter yellow interposed between the cable and the socket eobd rooster v2 v53?

Beware of the sw indicates whether to put the adapter or not,can take fire the chicken as and happened to someone!