Hi,
I have a problem with a edc15c17 of the stylus 115hp. In practice, I have to scodificare on the flash? I can't read it under the car and not even on the bench. The cock makes me ecuid and all the rest, and in the time to read it gives me error. Same error with both gallo1,gallo2 and mpps. Maybe I miss it or something might be broken??
Grassie.
Be... sure if with three tools, not the law,Originally Written by blackwolf76
but that was a fool to be adopted?
to read it in the tour you need to remove the e2prom, but from above you should have no problem, I know that the ecu has some problem.
ugo ---- president A.E.P.
But why? should remove it?
I made it without having any problems..
if you want to read it over the counter without a boot you have to remove it, then you have choices.
ugo ---- president A.E.P.
But it is certain that I do in Boot-Mode..
what sense would it read from the serial-to-tour?
read in Boot Mode and as a Backup, you are covered by any problems...
I used the first diagram posted... the second ? the same, only that ? to boot, that I should not serve.
with the tester are in common..
the cio? and on the same line...
test in boot mode
Not that you are wrong protocol?
with Mpps and Generic Bosch..
With the Rooster and the C167
Write permission
Quote