Ecm titanium and 2001 as they are reliable? Which ecu is best?

[giannimini]

winols ? without a doubt the best, but find the damos, (which from what I understand are the drivers vulgarly speaking of the ecm ) ? pi? difficult.
I think that already? with ecm, and opening the map in 2d, knowing the addresses of the individual curves is a good way to start.

however, as there seems to be the map I made? and why can't I download the file I've seen pi? 50 post now?

thanks and hello to all

[fuorigiri12000]

Am I wrong or are 80 posts?
Then.

[fabio1207]

Ecm titanium then ? better or not ?

[giannimini]

Hi Fabio, from what I understand, the updated versions are good, why? are starting to perfect the driver.
At the end from what I understood, each program would be good, then ? the programmer and the affisabilita of the driver in command.

But I think that on the old ecu even if you don't have the software updated all my drivers should be truthful and reliable.

In fact, on the last drive if apr? the prog you realize that out of the various updates

Then let? the word pi? experts.

Which ecu you have to open you? If you ask to be sure anyone you give? a hand or not you give and take? to be paid :-)

[fabio1207]

Hi Fabio, from what I understand, the updated versions are good, why? are starting to perfect the driver.
At the end from what I understood, each program would be good, then ? the programmer and the affisabilita of the driver in command.

But I think that on the old ecu even if you don't have the software updated all my drivers should be truthful and reliable.

In fact, on the last drive if apr? the prog you realize that out of the various updates

Then let? the word pi? experts.

Which ecu you have to open you? If you ask to be sure anyone you give? a hand or not you give and take? to be paid :-)

I have the ecm 2001, but the use of pi? map 3d only that I was able to read a map of a Fiat bravo but a limiter pressure turbo, not as a driver map the cio? has read it as if it were any point to not touch(insignificant) while the titanic has been found .I have to say that the ecm and map 3d are both clones, while the titanium ? ori.I have read that there are different types of software, but not all are good here ? can compared? thanks

[fabio1207]

Sorry ? can not find it than I did the automatic writing

[ugoboss]

Hi Fabio, from what I understand, the updated versions are good, why? are starting to perfect the driver.
At the end from what I understood, each program would be good, then ? the programmer and the affisabilita of the driver in command.

But I think that on the old ecu even if you don't have the software updated all my drivers should be truthful and reliable.

In fact, on the last drive if apr? the prog you realize that out of the various updates

Then let? the word pi? experts.

Which ecu you have to open you? If you ask to be sure anyone you give? a hand or not you give and take? to be paid :-)

I believe that none of you asked for the money, you have only been told that it is a unit that is very particular and difficult that you need to be leaning against a trainer who has developed experience on this type of ecu (if you are interested I do not have experience then you will not chedero never money) if you have noticed you have answered in a few 2 Or 3 , if you asked for help on a edc16+39 I received dozens of messages of help, you asked carmageddon if you did see a base to start, but then what do you do increases at random without knowing what it touches, I can make an example, it is as if you were to translate a letter from English to chinese and useless to ask someone who knows how to spell a word, then are missing all the other and you have to put them together in a way that they can sense, with this unit, and the same must be all in unison, if you want to start you have to start from the basics and then studies and go on'.
hello UGO

[voglioimparare]

I use titanium official from a couple of years now..well to start I recommend it to all,then, as experience grows,it becomes a sw incomplete and wrong. just yesterday I made a punto evo 1.6 mjet, drain the file ori,I open the driver and I saw strange things,like torque limiters negative,and maps, all of you are wrong, etc. call the support and ask explanations, test, and tell me that the driver is not correct (which is what succcede very often with alientech);well,compared to the other drivers,I open it and apart from the torque limiters arranged the rest was the same.all maps are important, and make you feel the increase is not put in the driver, type the time of injection for one thing. hey I try to make a mod with titanium the load in the coffee machine,and the machine seems not to have taken anything. about my work and seemed to be ok,then also having map 3d phew, I make the file with the one and magically appear all the maps "good". made a mod with that,the car travels well....
this is to tell you that,if I were to buy a sw ricomprerei titanium..
or for dirvene another, open the file of a edc16c39 and check the maps of the lim torque x gear..what's the use if from 2nd gear onwards, by default the lim are to 1000nm?? understand that enrich the driver to make the fat,but in the end, the substance a little...you don't need 1000 maps x to go to a machine,it only takes 2 right......

[fabio1207]

I use titanium official from a couple of years now..well to start I recommend it to all,then, as experience grows,it becomes a sw incomplete and wrong. just yesterday I made a punto evo 1.6 mjet, drain the file ori,I open the driver and I saw strange things,like torque limiters negative,and maps, all of you are wrong, etc. call the support and ask explanations, test, and tell me that the driver is not correct (which is what succcede very often with alientech);well,compared to the other drivers,I open it and apart from the torque limiters arranged the rest was the same.all maps are important, and make you feel the increase is not put in the driver, type the time of injection for one thing. hey I try to make a mod with titanium the load in the coffee machine,and the machine seems not to have taken anything. about my work and seemed to be ok,then also having map 3d phew, I make the file with the one and magically appear all the maps "good". made a mod with that,the car travels well....
this is to tell you that,if I were to buy a sw ricomprerei titanium..
or for dirvene another, open the file of a edc16c39 and check the maps of the lim torque x gear..what's the use if from 2nd gear onwards, by default the lim are to 1000nm?? understand that enrich the driver to make the fat,but in the end, the substance a little...you don't need 1000 maps x to go to a machine,it only takes 2 right......

so what you recommend me? or what would you recommend in general? ecm 2001 titanium map 3d or what? thanks

[legendaryslave]

so what you recommend me? or what would you recommend in general? ecm 2001 titanium map 3d or what? thanks

map3d to the point I'm