Fidofido say that the float problems? Nn I had the time to disassemble xke I'm repairing the distribution and various things mechanical? I noticed that the float moves the hand, the cio? makes the run cn ignition is switched on and the ignition switched off. Same thing with the diagnosis. The hand is up and down?... But from the opposite side.
fdai one thing, unmount the framework leaves detached from the connectors 15 minutes and re-mounting it, and if the same just mounted the ignition switched off and the instrument.
ugo ---- president A.E.P.
Thanks ugoboss. Provo. X tool you mean the picture right?
you mean the instrument panel.Originally Written by Omt
ugo ---- president A.E.P.
Guys, I solved it. Maybe the pu? be useful to someone.
After disconnecting the battery, then the connectors, check the float, and do various tests with the diagnosis...nothing, not working.
At the end I remove the picture, shooting the hand, after so many trials to get it replace in the right position (why? after you place it, well, I've turned the picture and continued to go in the wrong place), I was able to center the picture. Now it's ok, case solved.
Thanks to all for the help.
quoto for the framework
I solved at least x time cn manual displacement of the needle. If it were to occur again change the picture. If you could change the machine to the customer first������
I had the same problem these days and a moria !!! the fact also is the test after 3 days and resubmitted..........I'm looking for a picture!!!
What is a hare? A rabbit Abarth
Write permission
Quote