tt 2.0 tfsi 200cv of my friend, and file ori and mod strange

[ugoboss]

but at least the original file, And he or not ?
arrived to this point I have doubts even about this.

with ecm 2001 saw the driver I found, even if the speed? the maximum remains at 220... I could send a little more gas and increase a bit the turbo?

on what parameters would you recommend for me to hack?

my friend gave me the white paper, I would like to do p? practice on this.

I thought I had to increase the values of a 10 x 100 percentage, the values of the injection and the turbo starting at 2500-3000 rpm's go up and change the map in 2d and then open it in 3d and see if the curve ? half-homogeneous...

since this is a map and a disatro and the car still turns on, I don't think I combine damage.

ps; the patter to a minimum can? be that due to the fact that of the 25 points in pi? turbo all the spins contribute to the beating of the machine in the head to a minimum? or nothing to do with it?

ps2 you could send me a modified file to you to test it? I would be really very grateful to you, in pvt, I'm willing to give you the **** and all of them, even if you want to do it.

thanks again for all the responses. I wish you happy holidays
gianni

follow the advice of carmageddon, not the machine to do experiments here do big damage.

[carmageddon]

the original file ? good.

forget about ecm and any other program that does not support the damos for the information you are completely wrong and not out of any logic!

to go with this engine ? required knowledge and not advice on what to change.

the map ? a disaster ? would not even be kept on the pc, if you accept advice return it to the original and in the care of someone of valid and that you know what to do for this engine.

don't miss out on the changes to try and why? if you don't know what to do it takes very little to damage it!

I quote from only for spelling errors, help!

the correct sentence ? this : forget about the ecm and any other program that supports the damos why? the information is completely wrong and out of any logic

[giannimini]

With Winols for example, I may open it is the ecu ?

Program damos what do you mean? You name a few of the software readily available on the net?

In addition, as ever you are speaking evil of ecm titanium, do not use all of this? It makes me open the map and see all the correct values in 2001, if I proceed as I increase the fuel injection and turbo should I not true improvement? Of course I am talking about small changes in percentages exaggerated.

Thanks again, however, you have answered

[carmageddon]

the damos are informational packets associated with each of the ecu and in which there are all the information and technical data in order to understand how it really works a ecu.
ecm ? the worst and more? needless to existing program to understand how it works a ecu...let him lose.
as I have already? written does not make attempts and entrusted to an expert

[motorsport]

Quote,if you are not in the knowledge base of this unit and what is the mod with the sw you make us very little!!

[giannimini]

I realized okay guys, here we are. But then the alientech that sells them to make this software? I think it is a serious company. If it conmercio a software that opens the ecu handles, values, and the tables at the end are true, and allows you to modify the parameters in the... at The end does not do his job? Why? there is, then I'm software, and many here use it as well.

After which? I don't want to put it, or pretending to make out 250 horsepower from the engine of my friend, but maybe try to slightly increase the parameters which can be touched without damage.

I am talking about small differences.

Winols I have the chance? to try it, but I do not know to have to find the damons, there is a guide on the internet?

Ecm instead ? fairly intuitive. If I catch the right driver on ecm 2001 and I try to modify a bit the beginning putting on a 10x100 and thereby increasing the pressure of a 10 or 5 x 100 they do damage?

This I wanted to know. I would like to act as I have said before, from the met? the table and drop down in the lower right. For both tables.

Before loading the file in the machine of course, I would like to publish it here. If you do not tell me to upload it obviously did not load.

But at least the file that I posted ? the original real or not?

Tomorrow I prepare it, if you tell me that there seems to be fairly good and worth to try it, do it, otherwise I give up.

Thanks again for the tips

Gianni

[carmageddon]

there? that can't you understand ? that ecm, cos? as such, not in the if conversion factors are real why? based on the fantasy of people who have studied with the sole need? to make the change and not with the need? do really understand what you are touching (the names of the maps, conversion factors for values of output, conversion factors for the axes, switches, logic, etc, etc).
if you do not know the control strategy and the reasoning of each ecu that you want to face ? better to rely on experts.

[giannimini]

Hello carmagheddon and thanks again for responding.

There? that interests me ? change the map precisely. For now, I want to start cos?.

I do not care to go to study 100 books or me courses, I'm starting to passion and purpose to make a buck, then I don't feel the need? going to understand how it works, every bit of the map, I have capto what you mean, but to start, I can't take a cock from 200 euro, and learn giga and giga PDF.

Certainly, in the future, if this passion with me pleasure? it will be doing? but for now I must be satisfied with conoscebze and tools that I have

Returning to the speech ecu a guy with Map 2000 and ecm 2001 has changed. For this, I insisted.

Returning to the speech of my friend, if I put the ile that I found on the internet ? compatible or not? Eventually the ecm will that, having regard to that titanium open it up and I appear a lot of values, sure the driver will be? good point, and I could change that file. What do you say?

Os sorry for the spelling errors in the previous post, but I had the keyboard route from the pc from which I wrote :-)

[ugoboss]

you need to work on the original file, the one you posted together with the amended and the original? if it works that if you really want to try, you say that you are not interested, trying hard 100 books or courses, that you do it for passion, but if you block a control unit or, even worse, take out a piston, then the passion will pass, I repeat, is not the right machine to do experiments, then do what you think.

[carmageddon]

Hello carmagheddon and thanks again for responding.

There? that interests me ? change the map precisely. For now, I want to start cos?.

I do not care to go to study 100 books or me courses, I'm starting to passion and purpose to make a buck, then I don't feel the need? going to understand how it works, every bit of the map, I have capto what you mean, but to start, I can't take a cock from 200 euro, and learn giga and giga PDF.

Certainly, in the future, if this passion with me pleasure? it will be doing? but for now I must be satisfied with conoscebze and tools that I have

Returning to the speech ecu a guy with Map 2000 and ecm 2001 has changed. For this, I insisted.

Returning to the speech of my friend, if I put the ile that I found on the internet ? compatible or not? Eventually the ecm will that, having regard to that titanium open it up and I appear a lot of values, sure the driver will be? good point, and I could change that file. What do you say?

Os sorry for the spelling errors in the previous post, but I had the keyboard route from the pc from which I wrote :-)

for your bad luck parties with the wrong foot, ? how to build a house starting from the roof.
before you want to the foundations, then the load-bearing walls, then the stramezze and all the rest.
for your end ? the same thing and then I'll answer you with a question : do you want a job done ad hoc or do you want to do experiments?
I would look at the good from the experiment with the things of others, better to leave aside the presumption and the desire to do to leave the place with an expert who will do a job with full knowledge of the cause.
the programs used do not text, to make the difference ? only knowledge and experience, you can also use wingal 32 or a hex editor you want, but with the knowledge to make a good and proper job as without knowledge you can also use the bible, but if you have not studied not c ? how to do a correct job!

for the last time : let it go there? that says ecm!