I'm making confusion.... Then to correctly delete the egr: increase of 250 points values from 1c4b08 to 1c4b38 and 1c4bd4 to 1c4c04.
To make the egr active instead:
from 1c4b70 to 1c4b72 + 3500 points. (+100%)
From 1c4b74 to 1c4b86 + 4000 points (+100%)
From 1c4c3c to 1c4c3e + 3000 points (+100%)
From 1c4c40 to 1c4c52 + 3500 points ( + 100%)
Right? I understood well? Thanks x the time that you're dedicating!!
I know that in this discussion we went off topic. It asks for an ori, and if it is available from some user is given, to resolve any problems we try to create threads in the appropriate sections, so that no trace is left for everyone.
I'm sorry, Leandro 89, I was just trying to raccapezzarmi on how to handle the file. I didn't want to create confusion.
Guys... Nothing! I tried to close the cn plate, but did not ? changed nothing. Not ? that x is the case, exceptionally, someone could send me the file golds that I can download? Thanks
your problem is not from the egr, the file that you posted had the egr closed, and then if you have it closed with a plate, I would say that you have excluded from the problems, you have made a diagnosis? it is the first thing to do.
ugo ---- president A.E.P.
Ugoboss you are right in saying that with sheet I have excluded, but not finding the problem, I wanted to try as St. Thomas with a file ori. The diagnosis I have done more? times with different instruments. Gave me a faulty egr. Resetto everything, control everything, and does not appear on the pi? among the errors. The problem of the egr (and the cio? that had not been closed properly by the map) to me ? been made kindly note that here on the forum from you after I posted the mod file extract. The problem is that instead of the car ? that beats as if it had been touched by the advance, smokes and is not a departure ready. Control tubes, intercooler, spark plugs, turbine, stage, washers, injectors thinking sfiatassero but nothing, I clean the egr, plug the egr, control various sensors and brush my intake manifold, etc, etc...but nothing! Everything here, I was looking for the file ori and compare it with the one found below.
Thanks and hello
by comparing your file with one ori I noticed that they have also changed the area dtc, so it can be that if there is an error is not outside in the diagnosis, how many miles has the car, have you checked the stage with his dime, have you checked the gear on the bottom, the one on the motor shaft that is not moved by breaking the grain of the dowel.
ugo ---- president A.E.P.
That's why? does not come out of nothing in a diagnosis!! The phase with the templates I have controlled...to tell you the truth? the templates for this car I have ever purchased. I have done so? so many that I never had the need to buy them. I know for? I need to invest on this tool!! The car has 130.000 km...in theory. In practice, I know that in addition to the map have also modified the miles. The gear at the bottom I have not checked why? the wall was not I dropped.
sorry, but above you said that you have checked the stage, but without a dime as you did?Originally Written by Omt
ugo ---- president A.E.P.
On that engine came to me in the streets on the phase.. The motor shaft usually is in step with the support, the x-axis to cams and the sign c'?.
In the end it is the engine of a tide td...�
Last edited by leandro89; 05-01-2014 at 13:49
Write permission
Quote