tt 2.0 tfsi 200cv of my friend, and file ori and mod strange

[giannimini]

hi guys and good evening to all.
today I was walking around with a very dear friend with a tt 2.0 tfsi petrol engine of 200 horsepower.
chatting about pi? and the less we arrived at the address the car as always, and he told me that he had the car remapped but that has had many problems in this regard, type ticks strange, etc etc... in short, to be mapped to the machine told you that it was worse that the original.

then, I say, but you have the original files and modified? I said yes, of course. and I do give.

load them on my pc and I try to open them with ecm titanium and 2001.

from the outset I said that the map ? was made at a distance, and they also removed the limiter speed.

copmunque

load the file on the pc and I try to open it with ecm titanium, is the proper driver and select, then load the modified map always given to me by him, but nothing... in the column to the right of where you should appear pressure advance and injection I do not see anything....

okay, I say to reinstall ecm titanium, in the meantime, try again to open the 2 files with the ecm 2001.

I select the first 2 driver 2.0 tfsi and you open the map of the turbo and the advance.... and to my amazement I see that all the values in the table in 2d were increased by 25 points. 25 percentage points, loves to just 25 points as the number.... I am talking about the turbo.

in the program I see the other map turbo that there are 2, and the values increased to 25.

pressure limiter idem.

I open then the rev-limiter... what ? set to 110... strange thing is speed? set to ir? of 500 km/h... but I say to you... it will be? the wrong driver...

in addition, all the values of the injection I appear high and non-uniform... if I put the map in 3d seems to be a rocky bottom :-) then I think it is the wrong driver... or at least correct for the management of the turbo (maybe), and wrong for the rest...


and I try to open it with another driver...

this time all the values seem to be homogeneous... limiter set to 7000 and speed? set to 220... but it always seems to me strange as what....

however, I'm going to open the turbo and this time in 3d, it all seems very smooth... but if I'm going to see the gains... ? all to 0...

now I wonder... what have changed in this map? pu? be that they have combined a casino? also the checsum seem different... pu? never be?

pity that I can not post the file hindsight we did take a look...

then I open a file I found on the internet on a forum that I sembvra quite as serious as this that does not need to be utentio vip to download the file and I took a file of tt 200 hp or 210 I don't remember... this time titanium me the law. and appear many pi? values of 2001....

the ecu if I'm not mistaken ? read with mpps v5

I hope I illuminiate about it... the mechanic ? my friend who did the ecu but I would like to know if everything is there? ? normal or have I done wrong to caricargli the map wrong or hurt... why? if ? so I go to the eccanico that maybe he considers the preparer in the distance a monster instead ?... or for the less ? a monster of power units of washing machines.

thanks to everyone, for the help I hope to answer many... ps I attach a screen of the map if they bother you, tell me and them remove it immediately ;-)

limpress.JPGchecsum.JPGprerssturboftemp.jpgpressioneturbo.jpg

ps, I see that the file to me makes them load. if you want to and if I can I would like to post it to make a look. tell me what to do, and in case you spot them before I go to bed... now I'm leaving

[ugoboss]

if places them there we can take a look, have you tried to watch it in 2d.

[carmageddon]

to begin to understand the why? the car is worse to be changed ? need to have the modified file to check...the average increase for these engines ? 50-60 hp more? without any problem of the reliability

[giannimini]

guys here is the files are in the rar. from the original 2mb rar-1.35

give it a look I'm going from him so I read the thread

good evening guys and thanks.

[carmageddon]

mammamia!

return it the original ? a disaster!

not c ? it knowledge and consciousness.

[legendaryslave]

mammamia!

return it the original ? a disaster!

not c ? it knowledge and consciousness.

my mom that ? he knows stuff I

[frantik3]

mammamia!

return it the original ? a disaster!

not c ? it knowledge and consciousness.

quoto full and I confirm that these people think they can work on the diesel, but here we are talking about gasoline, but not of them would even put their hands on a diesel from this guy

[ugoboss]

in my humble opinion, does not make sense, this mapping.

[giannimini]

but at least the original file, And he or not ?
arrived to this point I have doubts even about this.

with ecm 2001 saw the driver I found, even if the speed? the maximum remains at 220... I could send a little more gas and increase a bit the turbo?

on what parameters would you recommend for me to hack?

my friend gave me the white paper, I would like to do p? practice on this.

I thought I had to increase the values of a 10 x 100 percentage, the values of the injection and the turbo starting at 2500-3000 rpm's go up and change the map in 2d and then open it in 3d and see if the curve ? half-homogeneous...

since this is a map and a disatro and the car still turns on, I don't think I combine damage.

ps; the patter to a minimum can? be that due to the fact that of the 25 points in pi? turbo all the spins contribute to the beating of the machine in the head to a minimum? or nothing to do with it?

ps2 you could send me a modified file to you to test it? I would be really very grateful to you, in pvt, I'm willing to give you the **** and all of them, even if you want to do it.

thanks again for all the responses. I wish you happy holidays
gianni

ps, if you want I send you the file that I found on the internet of the other tt that opens with titanium,,,, pero I don't understand why? the file of my friend I can open it only with the 2001.... can I caricargli this that I found on the internet? you can check the compatibility? if the place?

are in your hands, any advice ? very much appreciated, if you have the desire and the time to advise me I am really grateful to you, for this map my friend has paid if I can make it to half-discrete I would be really very, very happy, and I thank you very, very much.

[carmageddon]

the original file ? good.

forget about ecm and any other program that does not support the damos for the information you are completely wrong and not out of any logic!

to go with this engine ? required knowledge and not advice on what to change.

the map ? a disaster ? would not even be kept on the pc, if you accept advice return it to the original and in the care of someone of valid and that you know what to do for this engine.

don't miss out on the changes to try and why? if you don't know what to do it takes very little to damage it!