Hello
I have a interface MPPS v12 China clone.
Be good to read a Point 1.3 MJD6JF.P3.
Make an error when writing to the controller.
Since then, the machine does not start.
It communicates with the controller in MPPS and Autocom.
How can I fix this error?
Flashing Cock or BDM100 ?
To solved it?Originally Written by beriv
the mpps is not the law the complete file on the marelli,then when you go to write you lock the ecu,you should now write an original flash via bdm or you can try to write directly to a file with your number hw and sw cut to 1048kb
1024 = 1 mb
Marelli
Multijet
MJD6JFHW01B
2003 Punto 1.3 JTD 70cv B-CAN EOBD
Num SW: 1064P348
Dis FIAT: 55186608
Flash file: 458 752kb Read ok.I tried X-prog-BDM, 10% l? off to read Megale.
We can not delete it written error.
BDM100-sub that knows how to read and write?
if you want me to send you recovery!!!
What is a hare? A rabbit Abarth
if you have bdm looking for a bechup and put the flesch reading ease inside!!!
What is a hare? A rabbit Abarth
excuse
anyway, you have to cut with ecm the files from 2mb= 2048
check user defined and enter in the first box 1FFFFF,in the second 0FFFFF
save the file and you'll get a file from 1mb to write with mpps,usually the marelli you manage to restore
Read the MPPS:
that problem with this file?
or realized that the machine will not run,
to tried to rewrite the file ori?
S? you,
you and he programmed the E2prom,
and you need to fix with a file ori is the encoding partial or total worked with BDM or some HW serial..
Write permission
Quote
