MARELLI MJET impariamola!

[Backgroop]

I know this is really the displacement of the limiter and all the rest ? from here, then I don't know...

what would it be?

[Danny]

Seeing 5200, I think it refers to something that has to do with the maximum rpm.

[pdtechnology]

if you see the limiter ? 5100 port bit-by-bit to 5500 then the other bits ? 6000 scendilo 5400 and you get the shot at the limiter..***** o if I ask for the bit of the rail as a moddi?I've now read the discussion

[Danny]

The limiter shown by you pd, with the bit, are the righteous. But I do not go over 5300.....

[angelolsp]

but if you had the limiter set to 5500 bringing the break all at 5500 i.e. a limiter because you have to climb the bit to the 6000?

[pdtechnology]

if you read carefully I said that the bit from the mod are those ke range from 4800 to 5500 the do everything you need to 5500 and bit ke ? to 6000 the airports around here

and anyway, the fact that does not go beyond the 5300, you have to check other parameters need to see how you want to run the engine...

[Danny]

if you read carefully I said that the bit from the mod are those ke range from 4800 to 5500 the do everything you need to 5500 and bit ke ? to 6000 the airports around here

Gi? done, I set everything to 5400. In my file, the part that goes from 4900 to 5200. Made almost square to 5400, but stops at 5300. Which other parameters should I check?

[Fede78]

Thank you Backgroop to me indicated this discussion
Tomorrow I try this bit of the rail!

The other thing that would be interesting (at least for me... or for those who intend to mount a turbine is different) find the limiters of the turbo... on another forum I think I have read that they are to change 3 things... two bits and a map.
What do you think?

The other thing that I did not understand what you mean by firing a limiter?

Thanks!

[Tuningmotor88]

Thank you Backgroop to me indicated this discussion
Tomorrow I try this bit of the rail!

The other thing that would be interesting (at least for me... or for those who intend to mount a turbine is different) find the limiters of the turbo... on another forum I think I have read that they are to change 3 things... two bits and a map.
What do you think?

The other thing that I did not understand what you mean by firing a limiter?

Thanks!

Hello to gun limiter means the change of the limiters that we are out of the driver on the multijet

[Backgroop]

Hello to gun limiter means the change of the limiters that we are out of the driver on the multijet

I did not understand what do you mean??