Page 1 of 3 123 LastUltima
Results 1 to 10 of 29

Discussion: Deepening Siemens SID

View Hybrid

  1. #1
    THE AVERAGE USER L'avatar di matech
    Date Of Registration
    Jun 2012
    Et
    41
    Messages
    353

    Deepening Siemens SID

    Since the files section the petrol you ? very spiced with the study of any map interesting, I would like to propose here a study on the ECU Siemens SIDXXX, that does not seem to be very well-known...

    The reference file may be my if it's okay with you:

    http://www.professionalchiptuning.ne...3&d=1341697061

    I limit myself for the moment to give you some inspiration with practical assessments, given that they are a practical person ;D

    04699A: and following, the RAIL PRESSURE. Works differently from the ecu Bosch, in the sense that it never reaches the maximum pressure set (in the mod) unless you also modify other maps, such as the Driver's Wish. On one of the two c'? a maximum peak pressure, that I, for now, I have not passed. I still don't know if the flat part next to the map ? a limiter.

    04CC8E: TIME OF INJECTION. What I realized ? the drivers do not say it right: according to me the characteristic parameters are rpm and load. Or at least the rpm does not increase by scrolling the map to the right. rather I would see related to the rail pressure, the breaks relating to decreasing pressures by scrolling to the right. It is a map that, however, its effects in terms of change.

    04DA4C: LIM. PAIR. On certain SID li is also located in the area immediately following, 04DAE4 for example (What ? brought to the max, beyond a certain point)

    05146E: DRIVER'S WISH. They do not need presentations Make your dreams become reality!

    0558E0: TURBO PRESSURE. curious to see how the Volvo at the time of release the map give pressure! And you feel, in fact... (I have raised, even if perhaps it was fumosit? in riaccelerazioni...)

    055BEO: CORRECTION PRESSURE TURBO. Some drivers also say limiter. On Ford and PSA are also big differences on this map, but not on the next.

    05B3DC: TURBO PRESSURE. I don't know if it is a direct management of the VNT why? just small increments to vary the boost pressure.

    05D7E8: LIM. PAIR.




    I seem to have given you ideas not indifferent, but as for those, who understand us? ? nothing I will stop here, and I hope to discuss with you many of the other maps on which I have serious doubts. You submit the addresses and see if we can find!

    My black beast are the ADVANCES of the beginning of the INJECTION. I was not able to find them, and since the problem of these engines ? the fumosit?, are two things:
    -have an internal fluid dynamics me***
    -are a little "advance" and do not fail to properly burn the fuel injected with maps, "mod"

    Good study

  2. #2
    THE AVERAGE USER
    Date Of Registration
    Aug 2012
    Messages
    211
    Citazione Originally Written by matech Visualizza Messaggio
    Since the files section the petrol you ? very spiced with the study of any map interesting, I would like to propose here a study on the ECU Siemens SIDXXX, that does not seem to be very well-known...

    The reference file may be my if it's okay with you:

    http://www.professionalchiptuning.ne...3&d=1341697061

    I limit myself for the moment to give you some inspiration with practical assessments, given that they are a practical person ;D

    04699A: and following, the RAIL PRESSURE. Works differently from the ecu Bosch, in the sense that it never reaches the maximum pressure set (in the mod) unless you also modify other maps, such as the Driver's Wish. On one of the two c'? a maximum peak pressure, that I, for now, I have not passed. I still don't know if the flat part next to the map ? a limiter.

    04CC8E: TIME OF INJECTION. What I realized ? the drivers do not say it right: according to me the characteristic parameters are rpm and load. Or at least the rpm does not increase by scrolling the map to the right. rather I would see related to the rail pressure, the breaks relating to decreasing pressures by scrolling to the right. It is a map that, however, its effects in terms of change.

    04DA4C: LIM. PAIR. On certain SID li is also located in the area immediately following, 04DAE4 for example (What ? brought to the max, beyond a certain point)

    05146E: DRIVER'S WISH. They do not need presentations Make your dreams become reality!

    0558E0: TURBO PRESSURE. curious to see how the Volvo at the time of release the map give pressure! And you feel, in fact... (I have raised, even if perhaps it was fumosit? in riaccelerazioni...)

    055BEO: CORRECTION PRESSURE TURBO. Some drivers also say limiter. On Ford and PSA are also big differences on this map, but not on the next.

    05B3DC: TURBO PRESSURE. I don't know if it is a direct management of the VNT why? just small increments to vary the boost pressure.

    05D7E8: LIM. PAIR.




    I seem to have given you ideas not indifferent, but as for those, who understand us? ? nothing I will stop here, and I hope to discuss with you many of the other maps on which I have serious doubts. You submit the addresses and see if we can find!

    My black beast are the ADVANCES of the beginning of the INJECTION. I was not able to find them, and since the problem of these engines ? the fumosit?, are two things:
    -have an internal fluid dynamics me***
    -are a little "advance" and do not fail to properly burn the fuel injected with maps, "mod"

    Good study
    Exact just after the map of the 2 rail pressure to find the limiter

  3. #3
    THE AVERAGE USER
    Date Of Registration
    Jun 2012
    Messages
    285
    05146E not and drivers wish
    05D7E8 not, and a torque limiter
    the limiters rail are 2 this is not to salt the prex max
    for the rest is missing lots of stuff to walk properly these sid803/a

  4. #4
    Banned
    Date Of Registration
    Jul 2012
    Messages
    13
    Citazione Originally Written by pinotec Visualizza Messaggio
    05146E not and drivers wish
    05D7E8 not, and a torque limiter
    the limiters rail are 2 this is not to salt the prex max
    for the rest is missing lots of stuff to walk properly these sid803/a
    justly thou hast gone before us.
    I leave to you the word that you're er magician of 803!

  5. #5
    THE AVERAGE USER
    Date Of Registration
    Aug 2012
    Messages
    211
    Citazione Originally Written by pinotec Visualizza Messaggio
    05146E not and drivers wish
    05D7E8 not, and a torque limiter
    the limiters rail are 2 this is not to salt the prex max
    for the rest is missing lots of stuff to walk properly these sid803/a
    4da4e lim pair that you say?

  6. #6
    THE AVERAGE USER
    Date Of Registration
    Aug 2012
    Messages
    211
    Citazione Originally Written by mavaila1972 Visualizza Messaggio
    4da4e lim pair that you say?
    drive wish look 32768 up

  7. #7
    THE AVERAGE USER
    Date Of Registration
    Aug 2012
    Messages
    211
    Citazione Originally Written by pinotec Visualizza Messaggio
    05146E not and drivers wish
    05D7E8 not, and a torque limiter
    the limiters rail are 2 this is not to salt the prex max
    for the rest is missing lots of stuff to walk properly these sid803/a
    limiters prex rail 46ee2 and 4728a

  8. #8
    THE AVERAGE USER
    Date Of Registration
    Jun 2012
    Messages
    285
    no paska' but what magician... and that I have done many tests having my car which features sid 803... and then, also thanks to the aid of friends a little something including the

  9. #9
    ACTIVE USER (OF) L'avatar di magi1984
    Date Of Registration
    Jul 2012
    The resort
    Cisliano (MI)
    Messages
    1,529
    Driver Wish ? 061EC4 and 0620BC
    I await confirmation why? am still a beginner but I am sure almost 100%
    [COLOR="#0000FF"][CENTER][B]In life you never stop learning![/B][/CENTER][/COLOR]

    [CENTER][COLOR="#FF0000"][B]I do Not answer to private messages with requests for help! If you need a hand, ASK ON the FORUM!!![/B][/COLOR][/CENTER]

  10. #10
    THE AVERAGE USER
    Date Of Registration
    Aug 2012
    Messages
    211
    Citazione Originally Written by magi1984 Visualizza Messaggio
    Driver Wish ? 061EC4 and 0620BC
    I await confirmation why? am still a beginner but I am sure almost 100%
    bravo to them!

Page 1 of 3 123 LastUltima

Write permission

  • You you can not post new threads
  • You you can not send answers
  • You you can not send attachments
  • You you can not edit your posts
  •