ok thanks..installed I will try
ok thanks..installed I will try
if you have an alfa romeo I would recommend you multiecuscan, ? a great piece of software!!!
thanks for the advice..try now to get the softwareOriginally Written by racanacci
I used multiecuscam watch the target value and the detected and you immediately understand
you quoto multiecuscan, and do all
I think that the elm is the best, clearly not in the free version, then if one reads pretty well for the manual you can? do many interesting things
well it's not that the free version has many limitations... only 4 sensors, and after 20 minutes it crashes at the end it uses the same...
occurred that was not so good and also linearized by the map.....
Last edited by leandro89; 29-01-2014 to 21:16
in the free version you can not reset the service, a little bit, considering that most of the modern machines require resetting once fully serviced
this additional restriction does not, I realized why? I recorded it almost immediately...I've used it free at the beginning but for the service I only had to change the ELM....
however, even from the logged c'? always some machine that you can't? reset type the y 1.2 8-valve (2006) and others;
but this surely ? the fact that the elm is not able to read certain protocols or, at least, my;
try to make the changes to the can line....see if it improves ...? @ interface chinese that costs a few tens of euros, and not all are the same :-)
errata : "interface"
Last edited by leandro89; 29-01-2014 to 21:16
Write permission
Quote