the fiat bravo is not part of the problem can line

[robby51039]

I wanted to try jump-starting but with autocom does not, I found a body of a delta the same hw but I can't program the key as the customer has lost the card!!!!
this car has the bad luck inside!!!

[Backgroop]

I wanted to try jump-starting but with autocom does not, I found a body of a delta the same hw but I can't program the key as the customer has lost the card!!!!
this car has the bad luck inside!!!

you could try to do a scodifica total on the ccm( engine control module), replace the body and give it a try, or dissaldi the eeprom from the body not working and the insert in the working model

[robby51039]

you could try to do a scodifica total on the ccm( engine control module), replace the body and give it a try, or dissaldi the eeprom from the body not working and the insert in the working model

I tried to make scodifica total but the file is not processed, however, in diagnosis to me from the start-up permission,the body and with the micro, and I don't know how to read it, I don't have a player type upa....

[michele30]

Sorry in the meantime, try if you make the diagnosis, both in the body and in the control units in the can, cos? at least eliminate the problem that does not make the diagnosis.
Then in the case scodifichi the body

[Backgroop]

For the scodifica you have to read the file content inside the 95640 soik 8, faila read full bdm separate the affected file and the seats.. otherwise if you have the chance? dissaldi and read the E2prom and places the file

[obd75]

with the 2? body you enter the diagnosis in all the devices?
why? now, if you communicate you might be in the good way....

[alf74]