you will find part of the changes for immo off reported in the o.r?(I mean both flash e2prom)
you will find part of the changes for immo off reported in the o.r?(I mean both flash e2prom)
guys I have stumbled upon something of the sort, and after testing and retesting the ecu was not able to resume more
If you are never wrong means you're not solving a really difficult problem. This is a serious mistake
? a edc15vm+?
once I fixed this by blocking the 24c04 (pin7 raised and connected to pin8)? if I remember correctly, the ecu does not store more? errors.
or removing immobox but if not I think I will not enter diagnosis.
redline in your case the ecu ? gone why? you ? ruined the printed circuit board?
Then I knew that on the models that fit in the flash of the total is on both, while those that leap on the plcc is only on the e2p. I have tried both in this case, then I should just rewrite the ori and see if it goes?
The problem is to maintain a speed of thought is faster than the speed of the machine
watch on the meucci is the e2p total no problem in the first shotOriginally Written by redline
while the others are still talking about us, we have already solved the problem
GARAGE0864 ԼЄƓЄƝƊƛƦƳƧԼƛVЄ
we sincerely I tried today to process the file 24c04 with the meucci and comparing it to I have noticed that I only change 2 values, bringing them from the value 33 to 60, the rest remains the same.
The one that has worked for the total change a multitude? values.
The problem is to maintain a speed of thought is faster than the speed of the machine
Exactly! The meucci does not go to me it worked only to the ecuvonix. Yet I would like to find a solution for the light of the glow plugs. Pu? be that in addition to the tape, that you can't? do nothing?
Watch on this that I have done is flash that e2p it seems to me that the light was turned off is the one of the queues of the glow plugs.
The problem is to maintain a speed of thought is faster than the speed of the machine
So you recommend me to desolder? I up to now I have always made tour.
I unsoldered nothing, flash-to-tour and e2p with tweezers appropriate.
The problem is to maintain a speed of thought is faster than the speed of the machine
Write permission
Quote