Opel corsa 1.2 Z12XEP HW: 0261208940 SW: 1037400027

[pabloescobar]

I read the file golds that I enclose with the kess v2 a bosh ME7.6.2 940-0.027, and I was wondering if ? can the scodifica from the file, or do I have to read the eeprom

Thanks

[leandro89]

You open two threads for the same reason as ever?

[SGHERRY]

hello,tot impossible, and even clone it...there is not a single procedure x to set in motion...

[leandro89]

Explain the procedure

[legendaryslave]

hello,tot impossible, and even clone it...there is not a single procedure x to set in motion...

the procedure explain I
you have to get the car pass from the machine to the donor, and the ecu, then make it a virgin before disassemble it with op-com or tech2 mount it on the vehicle receiver to delete all of the keys with carpass of the machine that receives and re-align everything

[SGHERRY]

hi,sorry,the procedure is :you have to laggere the pin (carpass)of the control unit in its original,make virgin the control unit of the break or another car ,mount it on your, and to encode the keys and align..

[legendaryslave]

Exactly

[Elettrico]

procedure a bit wealthy, I still take notes, you never know

[obd75]

this procedure ? to be able to recover the ecu from total collapse?
this?it's not about the scode tot.

[legendaryslave]

this procedure ? to be able to recover the ecu from total collapse?
this?it's not about the scode tot.

it is on these does not remove the code manco with emulator