Hi to all,
place the file ori Injection and Turbo of a punto gt with control unit ME 2.7 someone ? able to explain the maps, unfortunately, I don't know this ecu
Injection I find the following maps:
Injection Zoned:16x16 address 0x77A2
Injection Full Load:16x7 address 0x78C9
Advance Zoned:16x16 address 0x757C
Advance Full Load :16x7 address 0x74E8
Rev limiter : 1x1 address 0x6DAA
Turbo:
I find the curves but I do not understand their meaning
Thanks
you see that on the point, there are 2 eeprom is a fuel injection and the rest,the other only the management turbo
I know I just wanted to understand what were the maps of the management turbo this?:Originally Written by gfr
Turbo Pressure
Limiter Pressure Turbo
An overboost
etc.
no one knows how to give a hand?
cos? how have you found the addresses of the eprom injection, you will find a driver for the eprom of the management of the turbo... ;-)
from what I remember ,after you do not find the eeprom to write, and the turbo you first change it mechanically
the turbo on the point ? managed mechanically, then ? normal that the ecu can't find the values. Having a car that does not work there long I don't even remember if it has a turbo pressure sensor... but I am almost certain that there is.
No the management is done through Pierbourg, but actually ? pi? simple to handle it mechanically....
in fact,******** I like elettroregolata... remember it to be mechanical.
In spite of the et? ? a car that beautiful performance.
on the iaw manage the turbo go quiet made many years ago and I had a similar I, as a car
Write permission
Quote