Sure, post it here, now I can't remember if 8 or 16v tomorrow morning we take a better look.
Sure, post it here, now I can't remember if 8 or 16v tomorrow morning we take a better look.
Then the car ? a 8v
Thanks
uv hello angel can you tell me how is the procedure I the same problem thanks
If you read a few posts back you will find how I fixed it anyway:Originally Written by kappaca
I scodificato the 29f200 as you do with the sirius 32n then I mounted an emulator can ( the car in question had the can ) directly on the chip of the can ( which now I can't remember the acronym but with a little research, you'll find him safe ) for the starter I had to report a negative, it seems to me, to the relay of the starter motor otherwise it wasn't running...
All here
hello then I have to give a negative to the relay starter motor because I did scodifica put the emulator I pulled the uch, but in doing so not spinning the starter motor I have to try to give negative to the relay starter motor
does not make me load the file it tells me that it is wrong..***** and I can?
give me a ***** you enter...
nothing, not even zipped
if you give me an ind ***** the sending
Last edited by msport (exil77grande); 06-11-2013 at 15:18
It seems strange to me that does not insert it, follow the procedure well.
write step by step what you do.
[IMG]http://bannerbreak*****/banners/3/563/135700419269659378.gif[/IMG]
It would be interesting to understand how he did the friend SGHERRY why? I got an emulator that divrebbe work with the ecu can bus, but I don't get the desired result.
I would like to attach it,I mode advanced and attached the file,if you load a photo, do it,if I want to upload the file to me nothing says wrong file is zipped and normal...
Write permission
Quote