Opinion the map 159 - 1.9 Mjet 150 hp

[zaga1]

look I don't like to make controversy, but if you give me to load a map without any logic in which the increments are given to you in the wrong way, instead of my made with a certain criterion, and a logic stratestata this means belittle the work of all those who have helped to make it happen.
Then the address of the pay-or-less does not hold his own, if I had posted a "base map", but with correct logic then I would have given a reason, I understand that you can't? some work and get to make calculations for a free week, but by your map I do understand that you have not the slightest idea what the logic.
I'm sorry if I'll attack you but I just want you to understand that it makes no sense what you're telling me, I really appreciate your good will? in the help me but will send me a map of the genre don't do that...there are 200 posts and 2 months of reasoning, calculations, and adjustments on this map in which many users have given their contribution to get to the point where I have arrived, now you come and say that the logic does not ? correct? and for pi? they send me a not c'? your own logic?

In addition, as a gi? that said, I made them specific questions on my map, I needed to have an opinion on the diagnosis and on the maps of lambda is not a new map.

On the fact of to give it a try to? surely in order to be able to say how it goes.

Ok give it a try and let me know

[admin]

I intervene in this discussion as it seems to me you're going off-topic,then the user zaga1 say that paolo159 has reason first because your map does not follow any logic why will smoke at high rpm, and the third because the speech of the map, in payment it is absolutely out of place so if you post something or you do it for the good or nothing apart from this here nobody sells anything and you don't need the jelly is ready, but for the advice,I hope I was clear.

[zaga1]

I intervene in this discussion as it seems to me you're going off-topic,then the user zaga1 say that paolo159 has reason first because your map does not follow any logic why will smoke at high rpm, and the third because the speech of the map, in payment it is absolutely out of place so if you post something or you do it for the good or nothing apart from this here nobody sells anything and you don't need the jelly is ready, but for the advice,I hope I was clear.

Thanks to the intervention according to me, there have been misunderstandings on the part of all but the most important, and that you have successfully resolved the discussion, and for me, and as if nothing had happened

[paolo159]

Hi all, following the small OT my last question to your post #201 you ? a little lost, someone of you can give me an opinion on this?
thanks a lot to all

[jacktheripper2]

Also...I would add that c'? a limiter just before you go under lambda=1

Are you sure of this? Why? I the only limiter that I have found ? to 0.5 and not to 1..
And I can confirm that you can go under 1 " and the machine injects of pi?.

[paolo159]

Hi guys,
until today, the car ? always went well with the map gas team and the values = 1, hour? I have to pass the revision at the revision I did do a smoke detection and the values are 2.5 / 2.6 so ? impossible that in this way exceed the test.
I would like to ask for your help to ensure that it can remain within the values set to 0.5 without having to replace the DPF.
Even with the map ORI eventually.
Who can help me????

thanks in advance to all :-)

I enclose ori (defappata) and mod, with which I made the measurement of the flue gas.
159.rar

[jacktheripper2]

Hi guys,
until today, the car ? always went well with the map gas team and the values = 1, hour? I have to pass the revision at the revision I did do a smoke detection and the values are 2.5 / 2.6 so ? impossible that in this way exceed the test.
I would like to ask for your help to ensure that it can remain within the values set to 0.5 without having to replace the DPF.
Even with the map ORI eventually.
Who can help me????

thanks in advance to all :-)

I enclose ori (defappata) and mod, with which I made the measurement of the flue gas.
159.rar

Test with lambda 1.15 or 1.2.

[paolo159]

I can't do too much attempts, every trial makes me pay :-(
I'm going to play it safe this time not to spend too much €€€
If rimettessi map and lambda ORI 2-do you think it can be good?

[jacktheripper2]

I can't do too much attempts, every trial makes me pay :-(
I'm going to play it safe this time not to spend too much €€€
If rimettessi map and lambda ORI 2-do you think it can be good?

Lambda-2??? Put the lambda 1.2 should be enough.

[paolo159]

with lambda 2 say that would give you problems? in any case, I'd leave the map only for review, then I'd work on new maps fumes ad hoc