hello all,I wanted to ask you for some advice on my problem.
I have to replace the ecu the engine of a bmw E60 DDE7 why? burned to the ground,not having the back up can I put a cenralina used with the same hw and sw only by changing the eprom 95320 or do I have to do the alignment cas dde.
in the case, I do the alignment, given that the diagnosis is not official, and not the year, these encodings l INPA could go well??
de walk the e2p from an ecu to artra dovresi ritovarti a perfect clone and not mecessita encoding
while the others are still talking about us, we have already solved the problem
GARAGE0864 ԼЄƓЄƝƊƛƦƳƧԼƛVЄ
off ep2 from the ecu burned out read it with a programmer without prejudice to the contents and then take the ecu used, put it in the bdm and write the saved file....From the reading of the file dap2 you should also see the series of sw dell ecu see if they are the same........
Sorry don't ? the same thing to exchange the Eprom??Originally Written by sno74
certainly that ? the same thing, but you have to see where they have placed ep2 then if it is in the bdm will also controls the sw, which is correct.....
I did the steps that you told me about you,but nothing is not part of the united states tells me not sync ok.
you can not try to scodificarla?
my programs do not support this ecu,and then once I get past the e2p I don't think the pi? a code problem but more? alignment cas dde,since I have not been able to change the micro
if the copy in the bdm does not need to do any kind of alignment...... you have to pass all the data on the ecu demolition....
if you read the beginning I do not have the backup of the old,the problem ? just what
Write permission
Quote