information class b 200 year 2011

[danielinoMB]

good morning
I just bought a class b 200 of 2007 and through my workshop I provedutto to do the remapping to modino.
my father has a class b as mine, but the year 2011 (w245) I have noticed by the control id,is mounted with the edc 17c43 (processor tc1797)
as are, say, a novice in the world of mappings (my made my co-worker )? possible to do it with galletto v2?I ordered and
I should get to days.
informing me on the vs site, I have also noticed that being a tricore must be disassembled and prepared for the boot right? for the connection issues I have no problem with balance on the processor of the video games for a living ,and my problem ? know if the galletto v2 behaves properly on certain types of processors.
thanks for reading guys !

daniel

[danielinoMB]

got the material (gallettov2 and ecm) smadonnato for the configuration and the flash of the hardware, but at least it works.. my b the law in 2min and 30 short-we'll let you know what comes on the edc 17 of my father.
greetings !!!

[faberecu]

I hope in the boot.... save all before

[danielinoMB]

sisi mine was a very simple edc16+ done safely with obd.
that of my father ? a edc 17, do I need to necessarily do it in the boot.
as soon as I dump I'll post it so you tell me if ? ok.

[sno74]

do not have too much of a hurry for the bootloader you have to open the ecu do it before some other reading edc16 bdm and see if everything works.....

[danielinoMB]

certainly sno thanks for the advice! I hope to be helpful to you in some way on the mechanics and electronics of the mercedes benz �

[blackwolf76]

certainly sno thanks for the advice! I hope to be helpful to you in some way on the mechanics and electronics of the mercedes benz 

The edc 17 after 2009 are in the boot. If of good quality, the cock should not have any problem in the work.

For the MB a little help ? always welcome, perhaps to repair a abs control unit for a w203...

[danielinoMB]

will update via obd, of course, the cock is good at the moment.... I almost started the edc17

[legendaryslave]

will update via obd, of course, the cock is good at the moment.... I almost started the edc17

calm the council read in boot mode, so the breakouts and once you have read the entire experiment in the world then I know pain if you grippa serial

[danielinoMB]

of course, I do not write if I don't have a full dump.?
but there is a guide on the procedure (for example, remove restore power) step-by-step.for the links no-problem are 5 threads, but to avoid damage if there is a guide that would be great