100%secureOriginally Written by 123alexs
100%secure
159 antituning I don't think that exist, the giulietta with the gallo2 laws can in a few minutes (a beauty) as to that which thou sayest rego88 you there are units of the fiat group, especially the 1600's to come that you don't see the data, and if you look at them are also different from edc16+39 classics such as maps, however, you read and write anyway.
I confirm, no antituning...
You read and write via obd...
The Bdm port for direct writing...
ok... now back to me
edc16c39 antituning do not exist and as already written, even if edc16c39 the 1.6 mjet are a bit different from the usual as management see luca stanca that does not work with the usual sw crack that many use,however, these cars are a bit steep, in fact, a few times even with hw official the same machine or not the law, and then after various tests the reading, or the law and then not write it etc etc then solution the most recommended and bdm.
[IMG]http://bannerbreak*****/banners/3/563/135700419269659378.gif[/IMG]
Hello ugoboss told me to be sure that with mpps or galletto can you? tranquillamnete to read my ecu for? I stress, though edc16c39 has a software is different from that of the 2400. In the network, moreover, I saw in the lists of the various car supported by mpps that the cock that my car doesn't ? this. If, at the time of the reading of the ecu do not find listed my car as I do? there are alternatives?
Thanks as always for the support!
you already said and I repeat do not trust the lists of interfaces, and a edc16+39 and read with interfaces that have this protocol, then if you take a gallo2 the laws in bdm and at that point you're good to go.
usa edc16c9 of the 159 1.9 or edc16c39 of the giulietta 2.0 does not change anything, I read the file in both ways, and I have verified that there are no differences
I do not think that the 159 has the edc16c9, or I'm wrong.
it is only a cosmetic problem of the software mpps
Quote
