Scodificare Ecu

[claudio-abarth]

but with the cock v2 control units scodifichi?

[carbo92]

but with the cock v2 control units scodifichi?

Depends.. there are those that can be made via the serial port or tour... type edc15p, edc15c7, and so on...

[claudio-abarth]

interesting.....much more? practical and without the use of hot air station,but the Me 7.9.10 can you? to do so

[ugoboss]

Depends.. there are those that can be made via the serial port or tour... type edc15p, edc15c7, and so on...

explain to us how you do, for example on a edc15p in serial.

[munro]

explain to us how you do, for example on a edc15p in serial.

I'm curious too...could you please explain the procedure carbo92???
...thank you...

[carbo92]

interesting.....much more? practical and without the use of hot air station,but the Me 7.9.10 can you? do so??

Not that you need to program the EEPROM 25080 / 95080

[carbo92]

I'm curious too...could you please explain the procedure carbo92???
...thank you...

Just connect to the ecu on the bench with the right pin in the K-Line, read the file ori, process it with the necessary programs and after which? the re-enter.

[ugoboss]

I would add that for some ECU you just need the cock v2! Not ? absolutely true that said to the first post, i.e. that with the rooster read and write only

this I have written you, and in this case, from what you say, with the cock, the read and write only.

[carbo92]

this I have written you, and in this case, from what you say, with the cock, the read and write only.

But scodifichi also

[ugoboss]

ok, but the file it processes with another soft, and then at the end with the cock read and write only.