Page 2 of 2 PrimaBefore 12
Results 11-18 of 18

View Hybrid

  1. #1
    THE ACTIVE USER L'avatar di ugoboss
    Date Of Registration
    Sep 2013
    The resort
    FRARA
    Messages
    1,825
    Citazione Originally Written by freddyecu Visualizza Messaggio
    The engine is shaking moves as if to go and 3 both at idle and in gear
    if it was the flywheel, you should also feel the noise is when it's the fault, and also when you turn off and turn on the machine

  2. #2
    THE AVERAGE USER
    Date Of Registration
    Mar 2013
    Messages
    229
    email the file to the machine, so we will ensure that the mod is ok and the egr was closed properly. in addition to that smonterei physically the egr to see if stuck open... it wouldn't be the first time that happens....

  3. #3
    THE AVERAGE USER L'avatar di nasone147
    Date Of Registration
    May 2013
    The resort
    avellino
    Et
    40
    Messages
    141
    could also be injector!not ? simple from far away!try to be more? scupoloso!find the flywheel,since the f? the acceleration is gradual and abrupt no!

  4. #4
    BEGINNER
    Date Of Registration
    Dec 2012
    Messages
    37
    Citazione Originally Written by freddyecu Visualizza Messaggio
    The engine is shaking moves as if to go and 3 both at idle and in gear
    sorry freddyecu but at this point on how the story seems to be + a seghettamento that a traballamento from the flywheel...I ask a foregone conclusion before the mapputura did it? sometimes increments that start too early cause jerking similar, but in fact without seeing the map ? impossible to help you could be a thousand things...ah obvious if it has started to do this after + easy that it is a failure

  5. #5
    THE AVERAGE USER L'avatar di tezzero
    Date Of Registration
    Sep 2012
    Messages
    224
    we have a few indications..mail the map
    [COLOR="#FF0000"][FONT=Comic Sans MS][FONT=Arial Black]to Doubt yourself is the first sign of intelligence[/FONT][/FONT].[/COLOR]

  6. #6
    BEGINNER
    Date Of Registration
    Sep 2013
    Messages
    22
    Hello, if I understood well, I have the same motor on the brera (2.0 jtdm) and maybe I have the same problem. Pi? that a vibration I feel like a singhiozzamento of the engine around 1500 rpm which affects the linearity? running of the car. You hear a lot if I keep the same number of turns while accelerating scomapre any faltering. I have the original mapping.

  7. #7
    THE ACTIVE USER L'avatar di ugoboss
    Date Of Registration
    Sep 2013
    The resort
    FRARA
    Messages
    1,825
    Citazione Originally Written by 6bazz! Visualizza Messaggio
    Hello, if I understood well, I have the same motor on the brera (2.0 jtdm) and maybe I have the same problem. Pi? that a vibration I feel like a singhiozzamento of the engine around 1500 rpm which affects the linearity? running of the car. You hear a lot if I keep the same number of turns while accelerating scomapre any faltering. I have the original mapping.
    it's not quite the same engine, you have the injection, which belongs to the same family, edc16c39, and also for you, the speech is similar ,and a lot of effort to make a diagnosis on a forum, I advice you to do try the car to a good mechanic with experience on these cars, and the problems can be many and only trying it out sometimes you can't figure out where it comes from.

  8. #8
    THE AVERAGE USER
    Date Of Registration
    Mar 2013
    Messages
    196
    I would try to faren round with a diagnosis attached and check the parameters to see more?, in diagnosis there are errors?

Page 2 of 2 PrimaBefore 12

Write permission

  • You you can not post new threads
  • You you can not send answers
  • You you can not send attachments
  • You you can not edit your posts
  •