Hi to all if I close l Egr on vag edc16 with the usual method tappandola me a failure?
Hi to all if I close l Egr on vag edc16 with the usual method tappandola me a failure?
There are no fast cars... But only foot heavy!!!!:cool::cool:
that method?
post ori and mod and see maybe you left some bits open............. edc 16 vag ? the cylinder head if you want to after the mod you will also sheet..........
on the vag edc16 as on those of the fiat group, just close them from the map, you don't need to close them physically, always that they are not locked open, or that have the electric route, in that case the light comes on
I agree...Originally Written by ugoboss
Then virtually lamacchina has the egr is already tapped, but not placed in the map and then from the failure of doing it in this way but staying pushed even failure? can you tell me something about the lawyer. hot and the first time I do...the file I downloaded on the forum and only x studio for now because I have not been able yet to read the file of the machine thanks again to all of you
There are no fast cars... But only foot heavy!!!!:cool::cool:
you have to post the rules, perhaps you can help, and not another took the dl forum.........
e-mail the file of the car and the mods that you have done
So guys, maybe I expressed myself badly the car is not modified in the ecu, they have only tapped l egr physically...and then from failure now with the change I made on qst file, then I do on the car the light will be turned on, or it can remain plugged physically..x as far as the start-up can abdare?
There are no fast cars... But only foot heavy!!!!:cool::cool:
if the egr is closed from the map it can remain closed even physically, that is not an error, but what you are saying is that it's useless to put a test file to see if it goes well, read your from the machine, edit it and then the seats for a control.
Write permission
Quote