Interface for scodifica IAW 16F

[matech]

I'm freaking out for a few hours in an attempt to scodificare the immo of a 16F with the interface and the PC program.

I have built the interface with the schema usually found on the net, accompanying programs F1.exe and F1 V2. unfortunately, I must use an adapter for the USB port.

I tried to feed the ECU and make several attempts, but I said "Initialization Failed".

I have changed the interface as indicated by "Dj-pieX" elsewhere, but I can not install the respective software provided in the two folders cd1 and cd2, me a decode.cab is missing


Now, I do not find it so? extremely interesting is the scodifica of these ecu at this point to buy an interface, and I would do it just to do a favor for a friend. Then c'? someone who is ? managed to get it to work? Or that has a working program for this purpose...

thanks.

[guidotacco]

test on a pc with a com port and see that v

[matech]

I was afraid of this answer, but I don't even have a pc with a com port!!

I do? pay one...

[guidotacco]

many of you have had your same problem with com port emulator

[matech]

I read a little, but I was hoping that was not the problem, precisely why? otherwise, now I have to go on another pc....

[giarras]

com port should work, we anyway use dim decoder that f? many ecu including 59 under 100.

[matech]

that tool

[magi1984]

the dim decoder ? a tool REBRANDED by the company dimtronic
really? they do not manufacture.the tool in fact ? the VULPES, then we stick the label dim decoder and say that ? their product.
probably ? a trade agreement taken with the company that produces the vulpes
however, if I can give you a council let them lose why? I am not a serious company.
I have personally tested on my skin and that of my clients

[mirks]

if you have urgency send me the ecu and see scodificarla, but I have the CDC marelli..

[matech]

not ? an urgency, pi? a favor...

and then also to put me to the test I have built the interface for? now obviously I have the problem to the com port!

if you could do these jobs with a minimum cost, I do, but otherwise I don't have a ride to justify hundreds of dollars of equipment that does not ammortizzer? never!

I will just do the 59F HW>100 with the cock...