not all of the edc16c39 require 45 minutes to read them.
not all of the edc16c39 require 45 minutes to read them.
[IMG]http://bannerbreak*****/banners/3/563/135700419269659378.gif[/IMG]
sorry guys,on a 159 2.0 170cv I tried to remove the dpf with time...what I wonder ? that are 3 or 4 months that we run without problems...
I was expecting the light engine, and instead...
so if you disable only the single bit about 1.9 euro 4 does not, you can regenerations and not c'? need to do the other mod usual?
or ? only to have more written in the diagnosis, staging dpf or probe..
nobody answers me?
I'm not so much convinced.... I have a 147 1.9 150cv without dpf, I physically removed the lambda sensor, and also if the port bit to 0 instead? 512, I, however, the failure diagnosis.... so according to me ? to see only the preparation
b? but in the diagnosis and no more with the lambda probe?
then you need to find the bit error and delete it... but who knows... I do not think that there is someone for me to say...
The problem of the programs remove DPF ? that removes the error, or the entire table and practically stop them,
the machine seems to go well, but continues to do regenerations...
A dpf-off, well done for now, for me, must necessarily be done by hand...
a part of what you said ? true, but a part no.... taking the makkina in question, made with time.... I after 13585km are tonato to check.... and, in fact, the makkina says.... last dpf regeneration, 13585km ago.... this means that the machine will no longer regenerate, but if you put the original area errors the machine tells you the failure of the pressure sensor differential, this is also to not make the most of the regenerations.Originally Written by ne0h
Sorry then, but I have always only had problems with ecusafe and stuff like that, I'm skeptical now on the functioning of those prog...
Guys, but in the end someone has done further testing of euro5? To me ? happened on a Delta 1.6 on which the downpipe ? was replaced with one ******. I have tried the file both with time and with ecusafe 2.0, do not seem to be doing more? regenerations, but the % clogging salt always and now the indicator light of the dpf ? on.
Write permission
Quote