How it works the Elm 327 Bluetooth?

[giarras]

look I've just tried it with my I do not ask for any pass and connects well..

[cristian83ta]

likely that you had already? paired the bluetooth, and you have tested from android? or pc, why? pc to me is not asking for the pin the problem comes from android

[sportknight]

I have noticed that with the bt version, I don't pi? to reset the service...

[123alexs]

I have noticed that with the bt version, I don't pi? to reset the service...

If anyone has had the same problems sportknight, I recommend to use the version Vgate Bluetooth.
With EDF, it all works.

Hello

[giary74]

If anyone has had the same problems sportknight, I recommend to use the version Vgate Bluetooth.
With EDF, it all works.

Hello

I have both versions of both USB and Bluetooth and with the second I can not reset the service. For pure curiosity?, not c'? a few modifications to make to the traditional one to make it work as the Vgate?

[manuel_abarth]

I too have the same problem and I can't reset the service, I can only see the abs-ecu and engine control unit

[123alexs]

I have both versions of both USB and Bluetooth and with the second I can not reset the service. For pure curiosity?, not c'? a few modifications to make to the traditional one to make it work as the Vgate?

Hello, at the edge of the chipset c'? a different version in addition to an architecture slightly different (I have both open), however given the prices I have bought both the diagnosis bluetooth:
- traditional => why? is exceptional with torque android
- Vgate => for the service and compatibility? general with FES

The adapters are not needed for the reset service and, in general, for connecting to the ECU!.. need to connect on some car models with control devices (abs, steering, brakes, etc...), but for this there is a list of well-detailed.

bye

[dibbutz]

Hello, at the edge of the chipset c'? a different version in addition to an architecture slightly different (I have both open), however given the prices I have bought both the diagnosis bluetooth:
- traditional => why? is exceptional with torque android
- Vgate => for the service and compatibility? general with FES

The adapters are not needed for the reset service and, in general, for connecting to the ECU!.. need to connect on some car models with control devices (abs, steering, brakes, etc...), but for this there is a list of well-detailed.

bye

personal example:
grande punto 1.3 mjet
Service Interval Reset |INFO|ADJ| ELM C19OBDKey C19 A3
so you need the adapter 3...
perhaps you mean that, in general, to clear the errors, the engine does not need adapters...but also them it is necessary to check the list of vehicles

[dibbutz]

also I have the elm327 bluetooth and the pin to me ? 1234
I tried to make it work with torque on android smartphones in all the sauces, and I can tell you you will be rich, some of the refresh of the data of the sensors are not precisely accurate (pressures and times acceleration)
for the rest I can tell you that to be rich, or at least I was doing great until prp yesterday, why? started not to give signs of life, is not seen by anyone smartphone (I tried also with friends) while powering up the classic red led when connected to the OBD, that can? be according to you??
however I no if I remember correctly, I paid about 15 euros

[gevin]

Sorry guys but if you leave always be inserted this device Elm327 bluetooth in the car something happens?
I would like to avoid to disassemble and reassemble the cover under the steering wheel, and every so often give a controllatina with Torque.
The one that I have chosen ? the mini has yet to happen to me.
Hello and to the next one!