How it works the Elm 327 Bluetooth?

[cristian83ta]

likely that you had already? paired the bluetooth, and you have tested from android? or pc, why? pc to me is not asking for the pin the problem comes from android

[luigigtc]

hello I the first elm 327 I took it with a usb cable,and it worked fine, then to use torque on the cell, I sold the usb and I got the blt wireless, use it equally on the pc, and then with all of the programs through recognition blt inside of the pc, and then assigning com ports normally in 3 days that I used it no problem, in the box and the usb port was 1.5 v, this wireless v. 1.4, if I have problems or else you held? updated.

[sportknight]

I have noticed that with the bt version, I don't pi? to reset the service...

[dibbutz]

also I have the elm327 bluetooth and the pin to me ? 1234
I tried to make it work with torque on android smartphones in all the sauces, and I can tell you you will be rich, some of the refresh of the data of the sensors are not precisely accurate (pressures and times acceleration)
for the rest I can tell you that to be rich, or at least I was doing great until prp yesterday, why? started not to give signs of life, is not seen by anyone smartphone (I tried also with friends) while powering up the classic red led when connected to the OBD, that can? be according to you??
however I no if I remember correctly, I paid about 15 euros

[gevin]

Sorry guys but if you leave always be inserted this device Elm327 bluetooth in the car something happens?
I would like to avoid to disassemble and reassemble the cover under the steering wheel, and every so often give a controllatina with Torque.
The one that I have chosen ? the mini has yet to happen to me.
Hello and to the next one!

[panterargento]

I use the bt, and on a hundred times that I have used has never lost the connection, only a couple of times not ? failed to connect to the boot, then ? one thing irrelevant, and I think that also depends on the quality? of the same, for the rest is everything like the one to the cable.

[gevin]

I use the bt, and on a hundred times that I have used has never lost the connection, only a couple of times not ? failed to connect to the boot, then ? one thing irrelevant, and I think that also depends on the quality? of the same, for the rest is everything like the one to the cable.

But is it okay if I leave it always on or can you? cause some trouble to the ecu?

[jared_poe]

I left it plugged in for 3 months and using just the car ? downloaded the battery

[panterargento]

But is it okay if I leave it always on or can you? cause some trouble to the ecu?

If the car you use every day at least for mezzo'now I think that there are problems, but if you use it sporadically, you should remove it...for me ? a hassle to always remove the slide, but are forced to do so as I use the car 2-3 days out of 7 and I would not like to experience inconveniences with the battery.
However, the ecu does not happen anything if you leave it always plugged in, the problem, precisely ? the battery...

[msport (exil77grande)]

if you want to leave it always plugged in and you are afraid that you discharge the battery for the short use of the medium, you can make a switch to the positive of the tool.