you also.. but usually, I do the sameOriginally Written by Alfa159 q4
you also.. but usually, I do the same
children then what should I do?
Gizmo you will have to open the original map after that go to the item egr duty cycle, or phase injection on the basis of as it is called in the voice of your map and port values in the table to the maximum value that is read immediately before change as explained, if the maximum value ? 12740 you have to bring all the boxes to 12740 if utikizzi ecm titanium, just select them all in the top right where there are commands where ec is the percentage that you can choose the etc even more? to the right of the ec to a colorful figure of the green the red the click once you have selected all the check boxes and write the value 12740 press enter and you will see that all the items you will bring to the value you have selected and if you then open the chart you will see that you will create? once you have made the change of the boxes that the red line will stay? straight across*how much equal from the beginning to the end with respect to the ori that I advise you to see the difference between the ori and the mod...............ok?? Let me know
thanks zaga1 lighthouse as you say and see what happens
You have to bring all the boxes to 12740 and you'll see that it worksI took the area of the egr duty cycle and I brought all the values to 12000 except those 12740 that I left them unchanged....
where am I wrong?
already done I just need to load the file into the machine....
Ok then do it and let us know ;-)
guys, the file is loaded, which in theory has the egr excluded and I do not see substantial differences, in my opinion, no... now or in the egr working or I don't feel anything.... I forgot to bring the diagnosis with me for him to try the egr and see what I said...the lighthouse soon
B? what were you hoping to hear?
I was hoping to have a little more ready under.... but by inexperienced what should I notice?
Write permission
Quote