hello to all.
are struggling with a golf4-1.9-115hp (bosch edc15),which have replaced the engine,they have mounted the 130hp leaving the ecu 115,the owner asked me if I could map it,I,I mapped and goes well but I wanted to ask you if c'? the way from the map to increase the pressure of the diesel oil.I enclose also the ori
thanks
? injector pump and common rail.....
Ok thanks!!!Originally Written by oakley1
I'm sorry, but the control unit 115 hp has different entries compared to the 130 hp??
What items are you talking about?
I speak of the entries in the map, for example, with ecm titanium opening I file between the 115 hp and 130 change, or are the same?
Apart from a few bends the most, indeed almost all of them are similar if not the same... I mean edc15... The difference is in the injectors and into the turbine if I remember well
No I was speaking of the entries of the map, not of the mechanical parts just to know if there was a difference of entries or less between 115 and 130 only this, but as I understand are the same as the control units and also the voices
Should be the same....
Lately, I did this edit also I...
Between the two versions of the engine, on the part of the contour, cambianmo the injectors. Those of the 130 I am very pi? large and gi? this should allow the drive to be better without additional modifications. The ecu should be the same, given that in some cases, the 115 is recognized as 130 and vice versa by the driver of the titanium, it's up to you to modify the maps to duty.
Write permission
Quote