hello guys desiderei know I also addresses...
hello guys desiderei know I also addresses...
hello post the file
hello david, listen, I've read 2 times the ecu and gave me 2 different files definitely one of the 2 times will be bad bed I have them both, you can see which is good and possibly scodificare ? thank you very much.
Last edited by msport (exil77grande); 16-05-2013 at 19:42
but in the bdm you can read and write?
and you can do it only cn the ecu without having to keep connected to the bike?
The Bdm is used for other control units.
The 5am they also make a bench, observing the pin-out
then having only the ecu...can I connect the pinout and read it?
Certainly, to read and write, having at least the foresight to nourish it in a safe and stable manner, and providing the power that simulates the key-on with a switch that can be used to simulate the on/off of the picture. A stabilized power supply from the tour would be the optimal.Originally Written by darksoulbreaker
M999
Returning to the bomb on the speech immo-off of 5AM, we place the two files tested a 999 base MY 2005 (136HP engine). With a simple hex editor, you can assess by yourself where to intervene to make the total working on the flash. This is the map of the bike in its original configuration.
999 5AMBS HW610.rar
999 5AMBS HW610 no immo.zip
M999
Write permission
Quote