dpf off.... problem diagnosis...

[david]

honestly... I prefer the swich off.. because I feel that ecusafe... or time... do not play just their job..!! otherwise I would not have had even the clogging 1000 thing.. that is not the case in the pre restyling.. .prior to 2008..
the thing that I do not understand.. and why... with the swich off.. I leave these data..
with ecusafe.. was a bit changed by the program... but I will... in my file... I have not changed anything on the outside of the swich off /pressure sensor/and a few dtc..!! and I do not understand why my friend.. these problems don't happen...
according to me' and revised the logic of the dpf.. with the redesign... and from here the clogging problems... because the program is the same.. the machine is the same.. but give 2 completely different results...

[progresso]

sorry, but sw and hw are the same?

[david]

no..!!! logically...

but... the example on 138-494 the problem of clogging is not there...
while on.. 160-252 or my 576-754... the problem is there..
the first mentioned... and a pre restyling.. it seems to me the end of 2006 or early 2007 (I have to ask ) no problem..

the second of 2010, and my 2009..

from 2008... according to me' and changed the logic of the dpf...

[SandroMarciano]

the restyling ? of '09, with the introduction of engines 2.0 €5, your you said that €4 true?

[david]

the restyling... released in 2008 with the my08..
in 2009, out of the new engines 2000 jtdm2...
my but.. and the beginning of 2009, and mounts still the old engine... 1.9 jtdm 150 bhp
I enclose a picture.. with the words of approval..

947019_301053520031521_599024953_n.jpg

[msport (exil77grande)]

I invite you to read the rules since you are not allowed to post from alternative services of the forum,also if you do not, you can still see attachments etc, there is a reason that you don't know seen that the regulation does not know where it is written, then don't ask for more users to send you in pm of things and if you use the search button you will find as a minimum 3 times how to attach the material in the forum,so in the meantime, we will add an infringement of the official,to the second come banned for a week at teza finally,in the community, you must not only ask, but also give you or at least respect the rules,thank you and good continuation.

[david]

do you like to do the professorino..!!!! bravo..!!
okay sara was in a hurry to post the maps to sandro.. that made me say "wrong" and do not use the mode advanced to attach them (I was already on the server ******)
I'm not looking for anything to anyone, I'm just asking you to give me a hand to fix MY CAR ...I'm not a mapper, and never will... im going to become as from the presentation of work in hardware... and proseguiro to do it...
if I had read the pages.... I have written... or at least I lincato how to make the swich off... (top secret stuff on the forum) then a help I gave!!! and if you read I have not written in this post...
I was wondering sandro not to link the photos... but to put it in perspective... (things that you do... as in this link.. http://www.professionalchiptuning.ne...i-su-modifiche )
as I saw it ... or you don't know give me the solution or keep secret your things...
thanks.... good help...

I have not asked to make a file ready... but only if you know the solution... if there was... and to this question !!!
proofread everything well...

now ... if you want to bannarmi.. bannami as well... but I pretend that this discussion is cancelled..!!!

free to choose....

ps.. take a good look at the photo.... and are looking for... on the 159 oc.... and you will see... that something good... I know I do as well ioo..!!! (paddle on 1.9 q tronic)

honestly this admonition... and the phrase... have you read the rules.... I have liked are in the dark... because the regulation lho bed..!! and I do not have behaved so badly...

ps... it is also in my profile... and look.. if you've never written a pm to someone!!!

congratulations.... I was hoping that at least you helps me.... but as I see..... I know all good in words.... but facts.....????????

thank you sandro.. that has had the courtesy to try to help me.. but unfortunately without success...

I repeat... if you re-read the whole.... (calmly) you will see.. that my help I gave you... I can give a reason for the maps loaded.... but it was only because I was already on the server.. and I was in a hurry to post them... because I had seen sandro connected...
but trust.. that regulation lho bed!!!

[progresso]

no..!!! logically...

but... the example on 138-494 the problem of clogging is not there...
while on.. 160-252 or my 576-754... the problem is there..
the first mentioned... and a pre restyling.. it seems to me the end of 2006 or early 2007 (I have to ask ) no problem..

the second of 2010, and my 2009..

from 2008... according to me' and changed the logic of the dpf...

then sorry, I would say that it is normal that you have that problem management dpf and other than maybe for the restilyng ec was a few tricks for the problems that afflict the dpf to the maximum, you had to read your file and swicciarlo or process with the various programs, however, if you can post the two files golds of the two cars and the more expert you will say what to change

[david]

alfa romeo 159 jtdm q-tronic 1.9 150 bhp 2009... my..


alfa romeo 159 1.9 jtdm 150 bhp (I think early 2007), however the file without clogging problems..



both the original files!!

[sportknight]

the bolt will not heat

know that those who know how to read a map does not need to see the switchoff that they have done on your perch? certainly knows how to do it by themselves,while those who do not know how to read a map if it does not do? none of those files,so don't worry about the file to your friend
in addition, we say that ? a little difficult to help you if you don't want to get help...

that said,I try to read the discussioe from the beginning and see what comes out