list sw for elm327

[dibbutz]

I think it is cos? in fact the bmw ? in December 2004, while the fiesta ? in April 2003, has anyone tried to install scantool?

no why? I assure you that scanmaster ? + full

[angelolsp]

but vag-com works cwith l elm?

[cjack]

You mean the vcds? I know it only works with the cable vag-com...
However, with the multiecuscan you can use the cable vag...

[angelolsp]

Then you should take the cable vag and make fiat and vag

[cjack]

well, it looks with that ecu ? compatible, on the site of multiecuscan...

[dibbutz]

if nn wrong with the vag you can only make some cars with the multiecuscan...? nn having the vag I await confirmation...

anyway if you have to use the multi to the point I take an ELM327 nn cost much and ? pi? that effective

[cjack]

I repeat that on the site multiecuscan there and written with units that you connect the cable kkl... maybe with the last cable vag that they can line us can you? also connect to other units...

[dibbutz]

so we are talking of the control units of the drive with the symbol KL (KLine)
from what I can see, however, in almost all the auto pi? recent are always needed the adapters with the VAG

http://www.multiecuscan.net/Supportedvehicleslist.aspx

[m999]

With ELM327, both wire and bluetooth work great the various Ducatidiag (next to chiuderei doors) as well as ScanST300, both for the diagnostics of the park the bike with ecu Marelli, Ducati-Morini-Guzzi, etc.. In particular ScanST300 also has applications for smartphones with Android os via bluetooth.

M999

[racanacci]

hi, I have a elm 327, I use it in particular with multiecuscan 1.4 a nice little program I must say only you ? limited on fiat, lancia and alfa romeo; at this point I would like to ask if there was a software did well as multiecuscan only for renault?