Page 4 of 55 PrimaBefore ... 234561454 ... LastUltima
Results 31-40 of 541

Discussion: EDC16C - impariamola!

  1. #31
    THE AVERAGE USER
    Date Of Registration
    Oct 2012
    Messages
    322
    You perfetttamente reason...and anyway an iq limiter to unlock

  2. #32
    THE AVERAGE USER
    Date Of Registration
    May 2013
    The resort
    Turin
    Messages
    185
    ok guys now I see 1cc118...so I was right about the fact that they were not expressed in mm^3

    1cc054 goes from 7700 to zero
    1cc35c ? constant to 10000
    1cf4ec goes from 110000 to zero

    at this point I wonder what is the unit? measurement of these limiters, according to which the ratio increasing for example 1cc054 from 7700 to 8192 I get an increase in X of the limit of the fuel?

  3. #33
    THE AVERAGE USER
    Date Of Registration
    Feb 2013
    The resort
    Arezzo - Florence
    Messages
    961
    Citazione Originally Written by paolo159 Visualizza Messaggio
    ok guys now I see 1cc118...so I was right about the fact that they were not expressed in mm^3
    Strange, I I mm^3/...
    http://img543.imageshack.us/img543/8...olioffacto.png

  4. #34
    THE AVERAGE USER
    Date Of Registration
    May 2013
    The resort
    Turin
    Messages
    185
    Sandro if I watch it in 2d the decimal values range from 7700 to zero, for? by comparing with the values expressed in the screeshot of winols that you attached I see that the conversion factor ? 100! where you see 77 I see 7700.

    just to better understand, that description of that map in winols? c'? still something I don't ? clear...

  5. #35
    THE AVERAGE USER
    Date Of Registration
    Feb 2013
    The resort
    Arezzo - Florence
    Messages
    961
    the conversion factors I put them I, ? obvious when scrolling through 2d show 7700, everywhere are expressed in cos? the flow rate of the diesel...

  6. #36
    THE AVERAGE USER
    Date Of Registration
    Feb 2013
    The resort
    Arezzo - Florence
    Messages
    961
    "map for engine speed dependent quantity limitation" this tells the damos, I don't understand what is not clear...

  7. #37
    THE AVERAGE USER L'avatar di Ghizmo
    Date Of Registration
    Sep 2012
    The resort
    Avellino
    Messages
    97
    I SandroMarciano, at this point ? everything is explained well on this map
    FGThec V2 Master
    Kess V2 + K-Tag Master

  8. #38
    THE AVERAGE USER
    Date Of Registration
    Oct 2012
    Messages
    322
    And..that is not c'? nothing more to say...
    really a small little thing...the bit rail..

  9. #39
    THE AVERAGE USER
    Date Of Registration
    Oct 2012
    Messages
    322
    Add speech advances....for IQ up to 100mm3, if you do not want to lose time to update bp and do the accounts...can you? safely give an increase of 1.5 degrees by 3000 rpm, then on the last bp dell IQ

  10. #40
    THE AVERAGE USER
    Date Of Registration
    Apr 2013
    Messages
    591
    already limiters-bit rail I never figured out where they are!

Page 4 of 55 PrimaBefore ... 234561454 ... LastUltima

Write permission

  • You you can not post new threads
  • You you can not send answers
  • You you can not send attachments
  • You you can not edit your posts
  •