guide to disabling the butterflies SWIRL engines Alfa MJT

[legendaryslave]

I apologize for the ignorance, but what risks you can meet off the swirl from the map ?

the risks of not to break the engine only in terms of performance, nothing changes, and a device for the contamination of the

[hyrosat]

This morning, very probably I can disassemble the intake manifold of my 159_1900_16V 150HP to check the valves swirl and give cleaned a little to the manifold and the egr, why? I have that annoying problem of seghettamento that makes me crazy I know your condition find everything, but can I clean it with industrial degreaser to lubricate and clean up everything? even why? smontai the pressure sensor located on the manifold of asprazione and I say not unto you as I found it a sort of glue near I always clean with degreaser I have done well?

greetings to all

[hyrosat]

Hello guys today I removed intake manifold of my 159 unfortunately, the situation does not ? of the best, in fact, I found the valves swirl routes from as you can see in the attached pictures, unfortunately I can still see the attachments to see the guide to the disabling of the valves, but I still would like an advice from you, I take off the last remains and refit modifying, or I find a precolettore also used and I leave everything unchanged in the ecu?

Thanks for the advice

Greetings hyrosatprecollettore suction 159_1900 jtdm 16V_150CV.jpg

[sportknight]

the first, the last, and leave everything else as is...

[garret]

guys ? almost like the system that used the bmw as my e60, and I have deleted in toto and I put the caps in ergal to close the hole, you don't need to a jot and if they break, you end up in the engine and do some serious damage, I would like to know who invented the

[hyrosat]

but then I have to close the egr ecu? how does it work?

[sportknight]

the egr it has nothing to do with the swirl, but it was close the egr evil does not make

[hyrosat]

the ecu should not give me any errors but it would continue to give me problems seghettamento?

[carmageddon]

guys ? almost like the system that used the bmw as my e60, and I have deleted in toto and I put the caps in ergal to close the hole, you don't need to a jot and if they break, you end up in the engine and do some serious damage, I would like to know who invented the

if I were you studierei a bit of fluid dynamics before making such a statement!
have not put them in the case, carry out specific tasks and useful to the engine cos? as to the user.
the fact that you have taken from you and be happy does not allow you to? to say thesis on the operation o l l utility? if you do not avvallate from the test, don't you think?

don't I have with you is clear, but do not agree on the information (in this specific case)

no offense.

[sportknight]

of course, not remove them ? the maximum,you should in theory lose to the netherlands,in practice, even I noticed...
but it is certain that removing them improves the reliability? of the vehicle, which is worth more? the loss to the netherlands...