splitting do not split anything, at least on the short term and finch? the corrections do not exceed 5mm^3/i, long go of the vibrations that are created by this imbalance can break it up to fatigue the shaft modote for example, but we talk about edge cases... and in any case affect the performance...
in the afternoon I see if I can take the additive and in the meantime I have also a jump from my mechanic and I have an idea of what is required by cos? the maximum I'll do a nice cleaning on all 4, which doesn't hurt :-)
guys a few posts ago I asked for a hand to find the 2 lim iq of which I had spoken, but surely my question ? lost :-)
who can help me?
purchase
Originally Written by SandroMarciano
I few posts ago I said...
Looking good, sonon3 in all , the first one that you find has the shape of a knife with so many teeth, all of after the lim torque, the second ? similar to the torque limiter and the third ? similar to the prjmo, the second and the third are side-by-side
Final fantasy x, the first there are several maps that are similar but none seems to me to be a lim iq unless the conversion factor is different from 1...
for the second and third I don't see maps that are similar to the lim of a couple.
which one ? the conversion factor?
Not c and factor conv...are directly mm3 enters in the topicke I opened...so nn disperse information...
ok mario..what topic? the one on edc16?
following your suggestions, unfortunately, are not able to find anything expressed in values that may reflect the mm3...
in the meantime, by analyzing the map I found these two maps, at first sight, seem familiar:
the first one starts from 1c1f86
the second starts from 1c30e8
would you know what they stand for?
no need to do it, you are committing then I'll give you a clue, the first one ? 1cc014, then the other 2 you can find more forward after the torque limiters of the various gears, one ? 1x12 the other ? similar to what I have posted to the address, the help you have given, now you have to find them alone, well I have a floor plan so, if you look at my topic of 147 sandro had given me many useful info, give us a eye, maybe the addresses will be some access on split-level, but if you look at the 2d limiters are really identical
Write permission
Quote