help map 159 1.9 JTDm 150 hp

[dart.1989]

here are the mods necessary to remove the dpf from the map:

I point you here addresses with the values that you have to insert in place of the original (in decimal):

1) - from the address 1c8bd4 to 1c8c4a brings all to zero
2) - from the address 1cb922 to 1cb952 port values from all 10280
3) - from the address 1cbd90 to 1cbdc0 port values from all 10280
4) - from the address 1cbdf6 to 1cbe26 port values from all 10280
5) - 1e3572 brings the value from 1000 to 6000
6) - from the address 1e3590 to 1e361c door all the values to zero
7) - the address 1e37ac to 1e37ba door all the values to 32767
8) - the address 1e4080 to 1e408c door all the values to 20000
9) - 1e408e brings the value from 106 to -27005
10) - 1e4090 brings the value from 0 to -32768
11) - from the address 1e4092 to 1e4096 door all the values to 32767
12) - 1e40a8 brings the value from 2 to -1000
13) - 1e40aa brings the value from -5 to -32768
14) - 1e40b6 brings the value from 5000 to 32768
15) - 1e40b8 brings the value from 125 to -32768
16) - from the address 1e4234 to 1e42b2 door all the values to zero
17) - from the address 1e43b6 to 1e43d2 door all the values to zero
18) - 1e442e brings the value from 400 to -6


at this point the dpf with all its controls and regeneration ? excluded! :-)

thanks paolo159 I checked the file, tried with ecusafe and from your tips I made some other changes, but gi? the big had made ecusafe thank you so much for the kindness and I apologize for the time that I made you lose, thank you very much to you and to all the staff and users of the site that I see that are of immense help for me that I'm starting from very little in this world

no, I don't think that they go well, in fact I wrote "are esgerati to have the dpf", but on the fact that maps lambda to change in the negative there is no doubt, then, if one wants to lean the relationship then what ? another question, in that case he must increase...

The fact of shuttering the egr, if you read carefully I wrote "it was really the intent?" I am convinced I have traded for maps of injection...

sandro excluding the dpf can? go to the map well?????

[paolo159]

I figured the dart are here to learn and share everything there? that I know! in this forum, unlike others, the spirit of sharing ? very high luck :-)
if you did it with ecusafe surely you will notice any difference compared to my advice but I can confirm that it is fine for the same.
and now we are looking forward to your next mod ;-P

[dart.1989]

I figured the dart are here to learn and share everything there? that I know! in this forum, unlike others, the spirit of sharing ? very high luck :-)
if you did it with ecusafe surely you will notice any difference compared to my advice but I can confirm that it is fine for the same.
and now we are looking forward to your next mod ;-P

paul only a few small difference but nothing that just exclude the fap is the feeling we see that it does.
you have given an eye to the modified by me? k do you think?

[mariodarkblue]

It would also delete the swirl if you do not know how to do it...I say

[paolo159]

unfortunately, no I also like you have not yet enabled the download, as soon as possible to the dar? have a look!

[mariodarkblue]

follow the other post

[dart.1989]

It would also delete the swirl if you do not know how to do it...I say

hello mario, what ? the swirl?

unfortunately, no I also like you have not yet enabled the download, as soon as possible to the dar? have a look!

ok thanks

[SandroMarciano]

sorry, here I open an OT... but why? you are convinced that close the swirl is a bad thing? if they work (well) are only good for the engine...

[mariodarkblue]

sandro...I am pro deleting, swirl...xk?...you know very well that with the time and the sludge that are formed inevitably in the intake manifold, these tend to crash..there were cases in which they are removed and eaten by the engine...with results that well images.
At this point, I prefer to delete them, both physically and from the map...I did it on my own...and I can assure you from personal experience that I have not experienced declines in sensitive while driving..

[hyrosat]

Guys I also have the problem of the swirl on my 159 I also posted the photo what do you advise me to remove them I have to take a precollettore and replace the old one, I see how they are put

precollettore suction 159_1900 jtdm 16V_150CV.jpg

then I open another post for an opinion on my first changes to my map and a 159 1900 16V 150 CV you give me an opinion?

Thanks