help map 159 1.9 JTDm 150 hp

[dart.1989]

attach it let's see if I can open it I will send you the driver

[paolo159]

hyrosat unfortunately, I checked but no cel I for ecm 2001, I have everything for ecm titanium but I'm not sure that it works...you can still give it a try

see annex

[hyrosat]

Thanks the same paolo159 but I can not download and then I read somewhere that those for titanium should not be on ecm 2001

[carbo92]

Thanks the same paolo159 but I can not download and then I read somewhere that those for titanium should not be on ecm 2001

You confirm that I do not work for the most part

[paolo159]

dart1989 if you give me the sw and hw do a look for the dpf so I'll give you a hand to exclude it ;-)

[dart.1989]

guys the dpf again and installed, but in a little pack and go away the map above at the moment I have excluded the dpf but before it is put will be? excluded

dart1989 if you give me the sw and hw do a look for the dpf so I'll give you a hand to exclude it ;-)

driver 068_871

[paolo159]

thanks dart, I'll have the addresses to edit the cos? you can do it yourself

[dart.1989]

thanks dart, I'll have the addresses to edit the cos? you can do it yourself

thanks paolo159

[paolo159]

Here are the mods necessary to remove the DPF from the map:

I point you here addresses with the values that you have to insert in place of the original (in decimal):

1) - from the address 1C8BD4 to 1C8C4A brings all to ZERO
2) - from the address 1CB922 to 1CB952 port values from all 10280
3) - from the address 1CBD90 to 1CBDC0 port values from all 10280
4) - from the address 1CBDF6 to 1CBE26 port values from all 10280
5) - 1E3572 brings the value from 1000 to 6000
6) - from the address 1E3590 to 1E361C door all the values to ZERO
7) - the address 1E37AC to 1E37BA door all the values to 32767
8) - the address 1E4080 to 1E408C door all the values to 20000
9) - 1E408E brings the value from 106 to -27005
10) - 1E4090 brings the value from 0 to -32768
11) - from the address 1E4092 to 1E4096 door all the values to 32767
12) - 1E40A8 brings the value from 2 to -1000
13) - 1E40AA brings the value from -5 to -32768
14) - 1E40b6 brings the value from 5000 to 32768
15) - 1E40B8 brings the value from 125 to -32768
16) - from the address 1E4234 to 1E42B2 door all the values to ZERO
17) - from the address 1E43B6 to 1E43D2 door all the values to ZERO
18) - 1E442E brings the value from 400 to -6


At this point the DPF with all its checks and regeneration ? excluded! :-)

[dart.1989]

here are the mods necessary to remove the dpf from the map:

I point you here addresses with the values that you have to insert in place of the original (in decimal):

1) - from the address 1c8bd4 to 1c8c4a brings all to zero
2) - from the address 1cb922 to 1cb952 port values from all 10280
3) - from the address 1cbd90 to 1cbdc0 port values from all 10280
4) - from the address 1cbdf6 to 1cbe26 port values from all 10280
5) - 1e3572 brings the value from 1000 to 6000
6) - from the address 1e3590 to 1e361c door all the values to zero
7) - the address 1e37ac to 1e37ba door all the values to 32767
8) - the address 1e4080 to 1e408c door all the values to 20000
9) - 1e408e brings the value from 106 to -27005
10) - 1e4090 brings the value from 0 to -32768
11) - from the address 1e4092 to 1e4096 door all the values to 32767
12) - 1e40a8 brings the value from 2 to -1000
13) - 1e40aa brings the value from -5 to -32768
14) - 1e40b6 brings the value from 5000 to 32768
15) - 1e40b8 brings the value from 125 to -32768
16) - from the address 1e4234 to 1e42b2 door all the values to zero
17) - from the address 1e43b6 to 1e43d2 door all the values to zero
18) - 1e442e brings the value from 400 to -6


at this point the dpf with all its controls and regeneration ? excluded! :-)

thanks paolo159 I checked the file, tried with ecusafe and from your tips I made some other changes, but gi? the big had made ecusafe thank you so much for the kindness and I apologize for the time that I made you lose, thank you very much to you and to all the staff and users of the site that I see that are of immense help for me that I'm starting from very little in this world

no, I don't think that they go well, in fact I wrote "are esgerati to have the dpf", but on the fact that maps lambda to change in the negative there is no doubt, then, if one wants to lean the relationship then what ? another question, in that case he must increase...

The fact of shuttering the egr, if you read carefully I wrote "it was really the intent?" I am convinced I have traded for maps of injection...

sandro excluding the dpf can? go to the map well?????