Copy gains on other maps

[vale76]

Raga hello.., can I copy from one map to another the increases? As you f??
Thanks

[leandro89]

if the maps are the same, I copied a 01b_162 on 01b_163, after you make changes to the map you have to go to the summary increments and you create the file increases, and after that apply it to the map that you are interested in

[baraldino]

Just that the hw is the same? If the sw and the other changes are good the same? But the maps are in different positions?
Thanks

[vale76]

Yes, but the procedure like ?? You need to load the file ori in its section , then you need to load in the mod that you want to copy the increases, then you need to display the increments in 2d and then?

[cawadany]

It is possible, but the ECM copy only the increments in the maps detected by the driver. Off the driver, not the copy.

[Tinturia]

1) Saving increments :File--> summary increments-->select the maps you wish to copy the increases -->save

2) a Copy of the increments on the new map: File-->summary increments-->open file increments that you saved in step 1)-->apply-->ok

Cos? copy the increments from one map to another, but if the numbers SW does not coincide with the eye to the values on the maps.

[carbo92]

Use winols ? pi? reliable for these things

[baraldino]

Then with ECM you can't copy a change in the egr or fap while with winols you?
Sorry for the ignorance

[carbo92]

With ecm you should do it in 2D while with winols you may try in tabular

[msport (exil77grande)]

to do the copy paste ecm is fine and there is nothing difficult,you just need to know how to do it I think that definitely is more complex to do it with winols.