reading ducati 848 with galletto V2

[igor]

hi all, I have tried to read a ducati 848 with the cock V2 but arrived at about 25% gives me an error
this ecu reads Kline
I tried to read with a spacer connected to the bike to keep the battery voltage at 14v but arrived at about 23%, the ecu makes a hissing sound, and the voltage I gradually goes down to 12.9 and then gives me the error
when I begin to read, I confirm the ID of the ecu and gives me the warning "careful reading time 1 hour" and then the part with the reading
below place the images related to the problem:
thank you in advance for the help

[igor]

below I attach the file that is read with the cock

[maurof650]

below I attach the file that is read with the cock

Just today I read an ecu IAW5AMHW610 micro st269, 848, which I posted on the forum in the bank. I used the mpps 12 that has read a file that is 320 kb.

.... the' MPPS, I did not read ).

From serial port or over the counter? I have read the tour with power stabilized at about 13 volts. Sometimes I may not be able to read with mpps only a matter of voltage.

[klajdin]

From serial port or over the counter? I have read the tour with power stabilized at about 13 volts. Sometimes I may not be able to read with mpps only a matter of voltage.

I have tried from serial port but I have not given a lot of importance to the voltage seen that was on a 12.2 - 12,3v so I given x is assumed that not just did it !

[legendaryslave]

read on to tour disconnected from the bike the same thing for writing and if you have in mag you recommend for this operation

[igor]

ok I read in the bdm with the cock and I can feed it 12V or should I keep it the most high?

[legendaryslave]

no no bdm with the kline voltage 12.5 goes well I always use batteries of the machines think some of you, you have to remove all the voltage drops due to the motorcycle, which, among other things, when you spin the framework automatically turn on the lights

[Dragonfly]

On from 12.00 - 12.50 alright

[klajdin]

Sorry, but I can see by the screen data that ? a 5AM, and the driver used ? 5SM , but nothing changes and the law the same ?

[legendaryslave]

Sorry, but I can see by the screen data that ? a 5AM, and the driver used ? 5SM , but nothing changes and the law the same ?

I think just you