Last edited by msport (exil77grande); 21-04-2013 at 14:42
give me straight, do is try, unplug it from the drain and let them measure the atmospheric pressure! not ? matter of DTC,it could also have been broken, check into the diagnosis, you need to measure 0Mbar!
I had the same problem on a different car, it was him!!!!
if it comes around to 40mbar you enter in the recovery, and without joining anything in the ecu! the sensor is between the tray of the liquid refrigerant and the centralinetta of the glow plugs, disconnect the tube from under the sensor.....and test, you'll see that ? him!
on a car, even though it was defappata, I had to replace, why? was broken! then if you are in Rome or nearby, give me to find today, that I have some sensor to try it!good luck!
Last edited by msport (exil77grande); 21-04-2013 at 14:43
not ? that I can understand much, but luca stanca not ? ok, something is missing by comparison with other
there is ?
with ecusafe I made alpha, croma,bravo, etc the same ecu with no type error . I think that there is a problem of fap your but of the sensor.
then the fap nn and closed everything and another speech . I remind you that before you know the bit almost all used ecusafe and on these cars strange problems.