Scodifica Partial Bosch ME7.3.1

[ecutano]

Raga hello , I have to make a scodifica partial to an ecu Bosch me7.3.1 mounted on a Alfa 147 1.6 cc , I took a unit from the demoman now should I run the scodifica partial, but I don't know where to start ? can run it through reading and writing from the OBD ?, you give me more? info possible.

Thanks

[scinti]

I don't know if you're atttrezzato to do this job in the annex to the instructions hello and good job

[motorsport]

hello,I suggest to make it to the tour in boot mode with the gallo1260 or with mpps....the friend I also posted the pin out!!

Then the procedure of law-making the file ori the processes with carsof..always keep the gold,make the partial write, turn on the framework 2 minutes,turn off, remove the ecu and re-enter another time ori....Finished!!

[scinti]

Explain to me please how to do the partial thanks

[legendaryslave]

read the original and you can save him write the file that generates the carsoft and the ecu and the total riscivi the file ori and the ecu ? partial

[ecutano]

I don't know if you're atttrezzato to do this job in the annex to the instructions hello and good job

I still can't download , if not against the rules to me could you post ?
Thanks Regards

[ecutano]

read the original and you can save him write the file that generates the carsoft and the ecu and the total riscivi the file ori and the ecu ? partial

Hello , the reading and writing of the file should be made in the OBD ? without boot mode ? ,I've got the Galletto2 clone , when you say you read the original you are referring to the control unit by scodificare , the one taken from the demoman ? no to the control unit to replace the vehicle ?.
Thanks

[motorsport]

Explain to me please how to do the partial thanks

glittering chiffon party dress.fitted you explained also the friend legend...I explained it in detail...and then I have to explain again??

[legendaryslave]

Hello , the reading and writing of the file should be made in the OBD ? without boot mode ? ,I've got the Galletto2 clone , when you say you read the original you are referring to the control unit by scodificare , the one taken from the demoman ? no to the control unit to replace the vehicle ?.
Thanks

if you ? the same soft and does not change the capacity it is assumed that the two ecu's are the same, understanding the parts from the original that is the one mantata on the car

[scinti]

Ok thanks for the information regards and good job