thank you very much for your offer but I don't like for people to work and not be paid.. however if you want I send it to you or if you give me a hand to fix it, I would be grateful, I would like to learn something then if I can fix it I have to replace the original one edc16c39 then if you accept the gift willingly.. I'm still looking for the solution to fix the bdm of the fgtechOriginally Written by giuseppe1374
send me the bdm that you settle for I, obviously, a free
yes, of course I did just that, in fact, the bdm is now recognized correctly, but an error in communication.. if I remember correctly, why? ? from very that ? placed in the drawer before you incasinasse the 93c46 when fed the bdm port with the included power supply is lit, the green led and you could hear the tick of the rel? looking at the diagram I see that ? the motorola that f? excite the rel? so for what I assume that it is to program mc68hc.. I also found the file for the flash of the micro but I don't have the upa for programming..
tell me how I could help you and I do it willingly for me not c? no problem qu? we are all to learn.
when I insert the power supply to the bdm you should turn on the green led and hear the tick of the rel? right?
l power supply is not always you need to insert depends on the ecu to read if you maybe explain to me better what you need to do and the steps you do we can talk
I give you an example.. then if I connect the bdm to the pc and the food bdm with its power supply, the green led should light up right? I have to say that the bdm and as new as he is never connected to any ecu..
surely this bdm you will be? sprogrammato and from my experience I can say that to others ? also happened when not used for a long period of time or for the wrong operation type plug it in when you install the soft, or opening a different version, then the second relay attacks when you take on with the ecu connected.according to me you should me to send it so you shelter I have repaired the dell other to other friends, if not to make you, tell me in short, so I don't think it will handle the spider from the hole
then I confirm that very probably c'? to program the motorola?
I confirm to you that can? be in the micro the problem, but of course I have to have it in my hands to give you the certainty to my advice and fix it and then you can go quiet on the ecu that you need to do
but to program the micro is only by means of the upa? or c'? way through the jtag, I made a jtag cable with the parallel port to accommodate the decoder and modem may be good?
Write permission
Quote