problems egr fiat scudo 2.0 mtj 120 hp

[peppe82]

one last thing ..but it works or lights up with the cap?thanks very much you ringrazioo so much

[magi1984]

no need tapparla, and go quiet that it works!
if you get some error, however, let us know, maybe you can disable also the error

[peppe82]

and the problem is that I have to plug anyway, welcome to the butterfly inside is not there more... and the third that I replace ...

[magi1984]

ok tap it, evil does not make

[peppe82]

Ookk thanks again magi if I can help the lighthouse thanks much information. now I go to test 9.

[motorsport]

ok I am glad that you have helped,unfortunately I have been busy,addresses, posted by me or taken from a file that I had panettone are always 4,but it changes from file to file addresses, and better always post the ori!!

[peppe82]

thank you all the same we are here x collaborate and to help us.anyway, this morning I put the file of the egr which I plugged with a flancia ,and I made a 10ina of km to the customers and took the half that he had to leave x l abroad, I hope that everything will be fine, and be satisfied with it.

[progresso]

I see only now your post, however, for that means there is a service car, which will replace egr valve and gasket changed, I think you could first try to apply the service if the result is disappointing, then, as a last resort eliminavi from the ecu

[michele30]

if I'm not mistaken c'? also a software update of the ecu for that problem

[magi1984]

the update reduces the opening of the egr to 25%, in practice, instead of seeing 4 humps in the 2d view, only the first and third