Recognition ecu bosh from the label and wiring diagram FGTech Galletto

[hackgen]

Hello all, I recently bought a FGTech Galletto 2-Master V5.0 with the extension of the bdm, I found a ecu for the initial trials, I don't know what kind of ecu ?, you give me a help to recognize it?
I would like to colleggarmi to the ecu and read it at the beginning without opening it with the cable boot
for? I don't know the layout of the connections on the pins of the connector, I'll post what c'? on the label, thanks.

BOSCH
51812902
194 4234A3EBM M15

[legendaryslave]

these numbers and the photo doesn't tell me anything you take a picture at the label and mail the number 028.......

[hackgen]

these numbers and the photo doesn't tell me anything you take a picture at the label and mail the number 028.......

the person we date, I said that maybe it was an a8.
0281012963 thanks, happy easter to you all.

[scinti]

This number corresponds to ecu bosch EDC16C39-5.65 Installed on the fiat croma 1.9 JTD 16v 110 KW motor type 939A 2.000
greetings

[hackgen]

Thanks glittering chiffon party dress.fitted, can you postarmi the connection diagram pin-to-pin to the ecu?

Thanks, place the picture of the cable I need to use.
cavo.jpg

This number corresponds to ecu bosch EDC16C39-5.65 Installed on the fiat croma 1.9 JTD 16v 110 KW motor type 939A 2.000
greetings

[legendaryslave]

Thanks glittering chiffon party dress.fitted, can you postarmi the connection diagram pin-to-pin to the ecu?

Thanks, place the picture of the cable I need to use.
cavo.jpg

because the woi read with the cable tricore these can be read easily with the bdm is much more practical

[scinti]

Let me ask you again that you have just made legendaryslave why? to complicate your life? in any case, I am attaching the pinout of the edc 16c39 hello and good job to all

[hackgen]

because the woi read with the cable tricore these can be read easily with the bdm is much more practical

Thank you all, really? I have to learn how to do it in both ways, in the bdm for? I have to take it apart to force ok, I try the first in the bdm. I wanted to ask you a thing to read in bdm you need to use the pads in the kit , in this case, bosh, or can I connect directly to the cable saldandoci the socket? on the ecu to solder c ? a verse? thanks

[scinti]

I up to now, the bosch I have read from and written to in serial the marelli before galletto 2 bdm soldering the wires of the schedule modified directly on the bdm port the important ? use e xxx bosch hello and good fun.
By the way, if you really want to continue this work even buy a template ,assembles the schedule of the spring, the council: don't template the chinese have purchased but for charity? ? unstable I prefer to solder the wires on the door bdm hello

[legendaryslave]

glittering chiffon party dress.fitted, then a question yesterday, I was doing a ecu tour I have not found the k-line cable tricore ,and I used the obd to do it but there is no or not I found it myself ?