then have you tried to load a map?
then have you tried to load a map?
No not loaded,Originally Written by vic64it
I want to first learn more? on these ecu and fix it up better..
but if you do not start to experience how can you learn?
You are fully agree with you..
but not on the expense and risk of others..
the first tells me to mind my own business and put in the client..
Hi,I gave a look at the wing on your map, and I think that then try and not worry about the smoke because these machines smoke very little .Pero have another problem-it vibrates the engine flywheel when you accelerate beating but I still found no solution to this problema.E better not to say it first to the customer,so don't do brute figure.
The flywheel????? Never problems
the flywheel vibrates with the mappings done with the feet, not to increase from low engine speeds and low engine loads
The truth I always start around 30% of the load and 1000-1200 rpm so I don't think that this is the problem and you dear, why do not you show us how you do with your hands,and another thing ,I assure you that I have more experience than you in both mappings, and sie in the mechanics so we would like to have a bit of respect on your part.
I forgot to say that I am the owner of an A4 130 hp that I have remapped 30-40 times doing all the tests possible and imaginable So I know better than you the weak points of this machine you trust.
Last edited by msport (exil77grande); 26-03-2013 at 16:00
Originally Written by vic64it
the flywheel vibrates with the mappings done with the feet, not to increase from low engine speeds and low engine loads
guys I don't want to see the disputes in the forum..I highly recommend it.
[COLOR="#FF0000"]There is a driving force stronger than steam, electricity and atomic energy: the will[/COLOR].
[COLOR="#FF0000"]personal Opinions, for educational purposes only.[/COLOR]
sorry I responded late and I saw your post
Write permission
Quote